Specific Safety Rules
1 . Always keep your hands and face away from vibrating head when operating.
2.Switch off the tool immediately if you notice abnormal noise or something faulty during operation.
3.Inspect the tool carefully for breakage, cracks or deformation if you acciden- tally drop it or strike it against something.
4.Do not charge the battery cartridge in locations where lacquer, paint, benzene, thinner, gasoline, gas or adhesive are storedlused.
5.Do not charge on cardboard or paer, cloth or bedding, straw mats, carpet- ing, vinyl or the like.
6. Do not charge in a dusty place or where lint accumulates. | n |
| |
7 . Do not allow pieces of metal, water or other foreign objects to get into the |
|
charger,port where the charging terminals are located. |
|
8.Do not carry the tool with finger on switch.
9.Do not set the tool down and switch it on. The vibrating head may whip around out of control and cause an accident.
IO . Be careful not to allow water, wet concrete or the like to get into the tool. Do not let the tool fall into wet concrete.
1 1 . Insert the vibrating head carefully between ironlsteel frames or reinforcing rods not to come in contact with them.
12.Do not crush or twist the flexible hose.
13.Do not overly bend the flexible hose.
14 . Use a wet cloth or the like to carefully wipe off any wet concrete left on the tool after use. Extra care should be given to thorough cleaning of the vents, switch area, cover openings, etc.
4
CORDLESS VIBRATING POKER Model VR250D
\\ Q a@ | |
\ \ I | 7 0 |
| |
Note: The switch and other part configurations may differ from country to country.
13