2)Fasten, by tying, the conversion cap lanyard to the loop in the pocket immediately in front of the inflator after passing it through the opening in the cover (Fig.22).
FIGURE 22 |
|
| Opening |
FOLD #1 | Lanyard |
| |
| FOLD #3 |
| FOLD #2 |
Right Lobe | Conversion Cap |
3)Position the conversion cap over the inflator’s hydrostatic valve opening. The conversion cap’s metal clip should be placed along the top of the inflator’s hydrostatic valve (Fig.23).
FIGURE 23
4)Secure the conversion cap to the inflator’s hydrostatic valve by applying pressure to the cap, at the metal clip.
FIGURE 24 |
Inflatable Vest with LIFTTM Owner’s Manual | 16 |