1)Before repacking:
Completely deflate the Inflatable Vest with LIFTTM (see Deflation p. 10).
NOTE: Before following the repacking sequence, be sure to properly
Your PFD (p.11).
2)Ensure the
FIGURE 26
Dust cap | Dust cap |
in stowed | position for |
position | deflation |
3)Open both front panel covers. Adjust the waist belt and chest belt buckles to their full lengths so that the Inflatable Vest with LIFTTM is laid out flat (Fig. 27 shows the right lobe, as worn).
FIGURE 27 |
FOLD #1 |
FOLD #3 |
FOLD #2 |
Right Lobe |
Inflatable Vest with LIFTTM Owner’s Manual | 18 |