CONVERSION CAP REMOVAL
Once the conversion cap is removed, the MD3196 becomes an automatic inflation device. Firmly pull the conversion cap lanyard to remove the conversion cap (Fig.25).
NOTE:Do not pull inflation lanyard when removing conversion cap
FIGURE 25 |
To remove the conversion cap when packed, pull the conversion cap lanyard out from the opening of the cover of the LP’s right lobe. Visually confirm the conversion cap has been removed from the valve opening.
Place the conversion cap in the
Repacking
IMPORTANT: Carefully read the entire Repacking instructions to achieve a properly packed Inflatable Vest with LIFTTM
If your Inflatable Vest with LIFTTM has been used and/or the hydrostatic inflator replaced, always inflate through the oral tube and check that it stays inflated at least overnight. With the dust cap in the top of the oral tube, gently squeeze the Inflatable Vest with LIFTTM until all air or gas has been expelled (Fig. 11). Do not wring or twist the Inflatable Vest with LIFTTM. Put the oral tube dust cap back in its stowed position on the oral tube (Fig. 26). Let the life jacket dry before packing.
17 | MUSTANG SURVIVAL |