Mustang Survival MD3183, MD3184 HOW do YOU Test Your PFD Using the Oral INFLATOR?, Wear Your PFD

Page 21

HOW DO YOU TEST YOUR PFD USING THE ORAL INFLATOR?

This test is not mandatory, however may be conducted using the following procedure.

WARNING: Use only a previously fired hydrostatic inflator to perform this test. DO NOT test with a fully armed hydrostatic inflator as double inflation may occur, possibly resulting in cell damage.

1)No spare parts or re-arming kits are needed to test your Inflatable PFD.

2)Put on the Inflatable PFD.

3)Get into shallow water, just deep enough that you can stand with your head above the surface.

4)If you are a weak swimmer or non-swimmer, inflate the Inflatable PFD partially so that you are supported well enough to be able to complete inflation without touching bottom, either orally or manually. Note this level of inflation because it is the minimum needed for you to safely use this Inflatable PFD.

5)Fully inflate the Inflatable PFD using the oral inflator.

6)See if the Inflatable PFD will float you on your back or just slightly back of vertical. In a relaxed floating position, verify that your mouth is well above the water’s surface. Note the effect of where you hold your legs and how you float.

7)Get out of the water and remove the Inflatable PFD. Completely deflate the Inflatable PFD using the oral inflator (see Deflating the Inflatable PFD p. 7).

8)Let the Inflatable PFD dry thoroughly. Re-arm (p. 8) and Repack the PFD (p. 11).

WEAR YOUR PFD

In approximately 80 percent of all boating fatalities, the victims were not wearing a PFD. Most fatal accidents happen on calm sunny days. This

Inflatable PFD Owner’s Manual

19

Page 20 Page 22
Image 21
Page 20 Page 22
Contents MD3183 Contents Approval Conditions and Carriage Requirements WHY are Pfds Required Safety EQUIPMENT? What is AN Inflatable PFD?Instructions for USE Uninspected Commercial Vessel UseComponent Inspection Instructions Readiness Checklist Donning InstructionsSizing and Fit Automatic Backup Inflation When the inflator isInflating Your Inflatable PFD Special Considerations for Inflatable Devices InformationOr if you are in a non-emergency Situation Your device is ready to be repacked see Repacking p Deflating the Inflatable PFDRe-arming Your PFD Usage Below FreezingCheck that New inflator Body indicator is Yellow inflator operating head . Dispose of the used capInflatable PFD If YES is Answer to both ReplacementQuestions, then Fabric Inflatable PFDZIP 2 Close by pulling the slider RepackingPage Sailing Harness Is Your PFD in Good and Serviceable CONDITION? Ii Ensure the manual pull-tab is accessible Care and Maintenance InstructionsCheck the following at the intervals listed below Before Each UseVi Ensure the single point status indicator is green Cleaning and Storing of Your Inflatable PFD HOW and WHY to Test Your PFDPut on the Inflatable PFD HOW do YOU Test Your PFD Using the Manual INFLATOR? Wear Your PFD HOW do YOU Test Your PFD Using the Oral INFLATOR?How hypothermia affects most adults HypothermiaCheck the single point status indicator before each use Inflatable PFD Safety Accessories Additional InformationDo not Attach PFD’S to Your Boat Page Page Page Do not Remove Prior to Sale
Related manuals
Manual 28 pages 23.25 Kb

MD3183, MD3184 specifications

Mustang Survival has long been an industry leader in personal flotation devices and water sports gear, and their MD3184 and MD3183 models epitomize their commitment to innovation and safety. Designed specifically for commercial applications, these life jackets are ideal for marine professionals, rescuers, and avid water sports enthusiasts who require robust performance and reliability.

The Mustang Survival MD3184 and MD3183 are built with advanced materials that prioritize durability and comfort. The outer shell is made from high-quality, abrasion-resistant fabric, ensuring that the jackets can withstand the rigors of marine environments while keeping wearers protected. The interior utilizes a soft, high-visibility foam that offers not only superior buoyancy but also increased comfort for prolonged use.

One of the standout features of the MD3184 and MD3183 is their design focused on mobility. These jackets boast a low-profile design that allows for ease of movement, ensuring that users can perform necessary tasks without restrictions. The strategically placed adjustments and side panels contribute to a snug fit, which is essential when working in dynamic situations on the water.

Safety is paramount in the design of these jackets. They include reflective piping and accents that enhance visibility in low light conditions, making it easier for rescue teams to locate individuals in distress. Additionally, both models are equipped with a built-in whistle and access points for harness attachment, enhancing their functionality in emergency scenarios.

The MD3184 and MD3183 also integrate Mustang Survival's proprietary Flotation Technology, which provides excellent buoyancy when needed most. The jackets are designed to turn unconscious wearers face-up, greatly increasing chances of survival until help arrives. It's this focus on advanced safety features that has made Mustang Survival a trusted name in the industry.

Furthermore, both the MD3184 and MD3183 models are available in various sizes to accommodate a wide range of users, promoting inclusivity in personal flotation devices. They also meet or exceed numerous safety standards, ensuring compliance with regulations and providing peace of mind for users.

In conclusion, the Mustang Survival MD3184 and MD3183 life jackets are excellent choices for anyone in need of reliable and high-performing flotation devices. Combining advanced safety features, comfort, and a focus on mobility, these models are set to deliver exceptional performance in various marine environments. Whether for work or leisure, Mustang Survival reaffirms its dedication to keeping individuals safe on the water.
Top Page Image Contents