Mustang Survival MD3183, MD3184 manual Deflating the Inflatable PFD

1)Double inflation (CO2 cylinder inflation after full oral inflation) could damage the Inflatable PFD,

2)Inflation when stored in a tight space could damage the Inflatable PFD, and

3)The Inflatable PFD could inflate when you are in an awkward place or position.

If this Inflatable PFD should inflate inadvertantly, a re-arm kit (MA7214) is required to re-arm the device.

IMPORTANT: The Inflatable PFD should be re-armed according to the instructions (Re-arming Your PFD, p. 8).

Deflating the Inflatable PFD

1)To deflate the Inflatable PFD, reverse the oral-inflation tube dust cap and insert it into the valve or depress valve with fingertip. The dust cap will not lock in the deflate position so it is necessary to hold it in place (Fig. 6).

2)Gently squeeze the Inflatable PFD until all air or gas has been expelled. To avoid damage; do not wring or twist the Inflatable PFD. Put the inflation tube dust cap back in its stowed position on the oral inflation tube (Fig. 7).

IMPORTANT: Ensure all air has been removed from the PFD.

	Cap In
	Deflate
	Position
	Figure 6
Oral Inflator	Figure 7
Dust cap	Dust cap
in stowed	position for
position	deflation

3)Examine the single point status

indicator (Fig. 1 and 2). If the indicator is red, the mechanism has been fired and the inflator requires service (see Re-arming your PFD, p. 9).

IMPORTANT: The single point status indicator must be green before proceeding.

4) Your device is ready to be repacked (see Repacking p. 11).

Inflatable PFD Owner’s Manual 7