Mustang Survival MD3184, MD3183 manual Usage Below Freezing, Re-arming Your PFD

Page 10

Usage Below Freezing

When the temperature is below freezing, the Inflatable PFD should be worn partially inflated because a fully discharged cylinder may not quickly or adequately inflate your Inflatable PFD. Under these conditions use the oral inflator to adequately top-up the PFD, after CO2 inflation.

WARNING: CO2 inflation could over-pressurize and damage your Inflatable PFD if already fully inflated.

Re-arming Your PFD

NOTE: A valid re-arm kit (MA7214) is required for this procedure.

1)Place the Inflatable PFD (Personal Flotation Device) on a smooth, flat

surface and wipe off any water.

 

Access the inflator by reaching under

 

the cover and pull it toward you,

 

turning the cell and cover inside-

 

out to fully expose the inflator for

 

re-arming. Hold the CO2 cylinder

Figure 8

through the fabric, using one hand

 

(Fig. 8).

 

 

Figure 9

Locking Ring

Key

2)Insert the metal key between the black locking ring and labeled yellow cap. Turn the key counter-clockwise (Fig. 9).

3)Turn the black locking ring counter-clockwise and lift off the cap

8

Inflatable PFD Owner’s Manual

Page 9 Page 11
Image 10
Page 9 Page 11
Contents MD3183 Contents Approval Conditions and Carriage Requirements What is AN Inflatable PFD? WHY are Pfds Required Safety EQUIPMENT?Uninspected Commercial Vessel Use Instructions for USEComponent Inspection Instructions Donning Instructions Readiness ChecklistSizing and Fit When the inflator is Automatic Backup InflationInflating Your Inflatable PFD Information Special Considerations for Inflatable DevicesOr if you are in a non-emergency Situation Deflating the Inflatable PFD Your device is ready to be repacked see Repacking pUsage Below Freezing Re-arming Your PFDYellow inflator operating head . Dispose of the used cap Check that New inflator Body indicator isInflatable PFD Questions, then ReplacementIf YES is Answer to both Fabric Inflatable PFDRepacking ZIP 2 Close by pulling the sliderPage Sailing Harness Is Your PFD in Good and Serviceable CONDITION? Check the following at the intervals listed below Care and Maintenance InstructionsIi Ensure the manual pull-tab is accessible Before Each UseVi Ensure the single point status indicator is green HOW and WHY to Test Your PFD Cleaning and Storing of Your Inflatable PFDPut on the Inflatable PFD HOW do YOU Test Your PFD Using the Manual INFLATOR? HOW do YOU Test Your PFD Using the Oral INFLATOR? Wear Your PFDHypothermia How hypothermia affects most adultsCheck the single point status indicator before each use Additional Information Inflatable PFD Safety AccessoriesDo not Attach PFD’S to Your Boat Page Page Page Do not Remove Prior to Sale
Related manuals
Manual 28 pages 23.25 Kb

MD3183, MD3184 specifications

Mustang Survival has long been an industry leader in personal flotation devices and water sports gear, and their MD3184 and MD3183 models epitomize their commitment to innovation and safety. Designed specifically for commercial applications, these life jackets are ideal for marine professionals, rescuers, and avid water sports enthusiasts who require robust performance and reliability.

The Mustang Survival MD3184 and MD3183 are built with advanced materials that prioritize durability and comfort. The outer shell is made from high-quality, abrasion-resistant fabric, ensuring that the jackets can withstand the rigors of marine environments while keeping wearers protected. The interior utilizes a soft, high-visibility foam that offers not only superior buoyancy but also increased comfort for prolonged use.

One of the standout features of the MD3184 and MD3183 is their design focused on mobility. These jackets boast a low-profile design that allows for ease of movement, ensuring that users can perform necessary tasks without restrictions. The strategically placed adjustments and side panels contribute to a snug fit, which is essential when working in dynamic situations on the water.

Safety is paramount in the design of these jackets. They include reflective piping and accents that enhance visibility in low light conditions, making it easier for rescue teams to locate individuals in distress. Additionally, both models are equipped with a built-in whistle and access points for harness attachment, enhancing their functionality in emergency scenarios.

The MD3184 and MD3183 also integrate Mustang Survival's proprietary Flotation Technology, which provides excellent buoyancy when needed most. The jackets are designed to turn unconscious wearers face-up, greatly increasing chances of survival until help arrives. It's this focus on advanced safety features that has made Mustang Survival a trusted name in the industry.

Furthermore, both the MD3184 and MD3183 models are available in various sizes to accommodate a wide range of users, promoting inclusivity in personal flotation devices. They also meet or exceed numerous safety standards, ensuring compliance with regulations and providing peace of mind for users.

In conclusion, the Mustang Survival MD3184 and MD3183 life jackets are excellent choices for anyone in need of reliable and high-performing flotation devices. Combining advanced safety features, comfort, and a focus on mobility, these models are set to deliver exceptional performance in various marine environments. Whether for work or leisure, Mustang Survival reaffirms its dedication to keeping individuals safe on the water.
Top Page Image Contents