Mustang Survival MD3184, MD3183 manual Special Considerations for Inflatable Devices, Information

Page 8

needle into the end of the gas cylinder, which is now punctured so that the gas instantly fills the life jacket. Total buoyancy is normally reached within 4 – 5 seconds.

Information

When inflated, the carbon dioxide (CO2 gas) used to inflate the PFD will slowly escape through the fabric over time. A slight reduction of pressure will be observed after several hours of inflation. Topping up by oral inflation may be required in the event of very prolonged immersion.

IMPORTANT: See Special Considerations for Inflatable Devices

3)Oral Inflation

Properly armed and inspected

Inflatable PFDs will inflate

Figure 5

when manually or automatically

 

activated. However, you can fully

 

inflate the Inflatable PFD by mouth

 

(Fig. 5) should inflation not occur,

 

or if you are in a non-emergency

 

situation.

 

i.To orally inflate the Inflatable PFD, first ensure that each of the zippers (2) are completely opened.

NOTE: Oral inflation may cause the Inflatable PFD to break-out suddenly (loudly) if any of the zippers are closed.

ii.Locate the oral inflation tube by opening the wearer’s left front panel of the Inflatable PFD. Remove the dust cap from the end of the oral tube and blow into the tube until the Inflatable PFD is fully inflated.

WARNING: Avoid double inflation (CO2 cylinder inflation after full oral inflation) as it could damage the PFD.

Special Considerations for Inflatable Devices

The Inflatable PFD might not be armed when needed, either knowingly or unknowingly. Inadvertant inflation causes several risks that you must address to avoid drowning. Much less common but also important are:

6

Inflatable PFD Owner’s Manual

Page 7 Page 9
Image 8
Page 7 Page 9
Contents MD3183 Contents Approval Conditions and Carriage Requirements What is AN Inflatable PFD? WHY are Pfds Required Safety EQUIPMENT?Component Inspection Instructions Instructions for USEUninspected Commercial Vessel Use Sizing and Fit Readiness ChecklistDonning Instructions Inflating Your Inflatable PFD Automatic Backup InflationWhen the inflator is Or if you are in a non-emergency Situation Special Considerations for Inflatable DevicesInformation Deflating the Inflatable PFD Your device is ready to be repacked see Repacking pUsage Below Freezing Re-arming Your PFDInflatable PFD Check that New inflator Body indicator isYellow inflator operating head . Dispose of the used cap Replacement If YES is Answer to bothQuestions, then Fabric Inflatable PFDRepacking ZIP 2 Close by pulling the sliderPage Sailing Harness Is Your PFD in Good and Serviceable CONDITION? Care and Maintenance Instructions Ii Ensure the manual pull-tab is accessibleCheck the following at the intervals listed below Before Each UseVi Ensure the single point status indicator is green Put on the Inflatable PFD Cleaning and Storing of Your Inflatable PFDHOW and WHY to Test Your PFD HOW do YOU Test Your PFD Using the Manual INFLATOR? HOW do YOU Test Your PFD Using the Oral INFLATOR? Wear Your PFDHypothermia How hypothermia affects most adultsCheck the single point status indicator before each use Do not Attach PFD’S to Your Boat Inflatable PFD Safety AccessoriesAdditional Information Page Page Page Do not Remove Prior to Sale
Related manuals
Manual 28 pages 23.25 Kb

MD3183, MD3184 specifications

Mustang Survival has long been an industry leader in personal flotation devices and water sports gear, and their MD3184 and MD3183 models epitomize their commitment to innovation and safety. Designed specifically for commercial applications, these life jackets are ideal for marine professionals, rescuers, and avid water sports enthusiasts who require robust performance and reliability.

The Mustang Survival MD3184 and MD3183 are built with advanced materials that prioritize durability and comfort. The outer shell is made from high-quality, abrasion-resistant fabric, ensuring that the jackets can withstand the rigors of marine environments while keeping wearers protected. The interior utilizes a soft, high-visibility foam that offers not only superior buoyancy but also increased comfort for prolonged use.

One of the standout features of the MD3184 and MD3183 is their design focused on mobility. These jackets boast a low-profile design that allows for ease of movement, ensuring that users can perform necessary tasks without restrictions. The strategically placed adjustments and side panels contribute to a snug fit, which is essential when working in dynamic situations on the water.

Safety is paramount in the design of these jackets. They include reflective piping and accents that enhance visibility in low light conditions, making it easier for rescue teams to locate individuals in distress. Additionally, both models are equipped with a built-in whistle and access points for harness attachment, enhancing their functionality in emergency scenarios.

The MD3184 and MD3183 also integrate Mustang Survival's proprietary Flotation Technology, which provides excellent buoyancy when needed most. The jackets are designed to turn unconscious wearers face-up, greatly increasing chances of survival until help arrives. It's this focus on advanced safety features that has made Mustang Survival a trusted name in the industry.

Furthermore, both the MD3184 and MD3183 models are available in various sizes to accommodate a wide range of users, promoting inclusivity in personal flotation devices. They also meet or exceed numerous safety standards, ensuring compliance with regulations and providing peace of mind for users.

In conclusion, the Mustang Survival MD3184 and MD3183 life jackets are excellent choices for anyone in need of reliable and high-performing flotation devices. Combining advanced safety features, comfort, and a focus on mobility, these models are set to deliver exceptional performance in various marine environments. Whether for work or leisure, Mustang Survival reaffirms its dedication to keeping individuals safe on the water.
Top Page Image Contents