Chapter 2: Server Installation
Locking Tabs
Each inner rail has a locking tab. This tab locks the chassis into place when installed and pushed fully into the rack. These tabs also lock the chassis in place when fully extended from the rack. This prevents the server from coming completely out of the rack when when the chassis is pulled out for servicing.
Releasing the Inner Rail
Use the procedure below to release the inner rails from the outer rails.
Releasing Inner Rail from the Outer Rails
1.Identify the left and right outer rail assemblies as described previously..
2.Pull the inner rail out of the outer rail until it is fully extended as illustrated below.
3.Press the locking tab down to release the inner rail.
4.Pull the inner rail all the way out.
5.Repeat for the other outer rail.
Figure 2-2. Extending and Releasing the Inner Rail
1
12
13
14