SUPER MICRO Computer 2022G-URF user manual Adding PCI Expansion Cards, PCI Expansion Slots

Page 60

A+ SERVER 2022G-URF User's Manual

5-6 Adding PCI Expansion Cards

PCI Expansion Slots

One riser card is used to support PCI expansion cards in the system. The RSC- R2UU-UA3E8+ riser card can support one UIO card and three full-height, full-length PCI-Express x8 expansion cards.

Installing a PCI Add-on Card

1.Remove the chassis cover.

2.Release the locking tab that corresponds to the PCI slot shield for the slot you wish to populate.

3.Insert the expansion card into the riser card, pushing down with your thumbs evenly on both sides of the card.

4.Slide the add-on card into the riser card and attach the add-on card bracket in place of the PCI slot shield.

5.Secure the add-on card by closing the PCI slot shield lever.

6.Connect cables to the add-on card as necessary.

Note: If the left side riser is with 2 or more x8 PCI-E slots make sure an installed card on the left side riser is detected. If it is not, then go to the system’s BIOS Setup and in Advanced/ PCI/PnP Configuration /SXB1 Configuration BIOS setting select the [2x8] option. Then save the BIOS setting changes and reboot the system.

5-10

Image 60
Contents Super Page Preface About This ManualManual Organization Advanced Chassis Setup BiosContents System Interface Advanced Chassis Setup Appendix C System Specifications Chapter Introduction OverviewServerboard Features Processors MemorySerial ATA Server Chassis Features Front Control Panel BackplaneCooling System AMD SR5670/SP5100 Chipset System Block Diagram Contacting Supermicro Headquarters EuropeAsia-Pacific Chapter Server Installation Preparing for SetupChoosing a Setup Location Unpacking the SystemPage Ambient Operating Temperature Rack Mounting ConsiderationsInstalling the System into a Rack Identifying the Sections of the Rack RailsOutward Locking Tabs Releasing the Inner RailReleasing Inner Rail from the Outer Rails Installing The Inner Rails on the Chassis Installing the Inner RailsInstalling the Outer Rails on the Rack Installing the Outer RailsStandard Chassis Installation Installing the Chassis into a Rack FigureChecking the Serverboard Setup Accessing the inside of the SystemChecking the Components and Setup Accessing the Inside of the System Checking the Drive Bay Setup Providing PowerChecking the Drives Checking the AirflowPage Reset PowerChapter System Interface Control Panel ButtonsPower Fail Control Panel LEDsInformation LED Informational LED StatusNIC1 Drive Carrier LEDs Sata DrivesChapter Standardized Warning Statements for AC Systems About Standardized Warning Statementsהרהזא תורהצה ןונקת Bewaar Deze Instructies Installation Instructions 設置手順書 システムを電源に接続する前に、設置手順書をお読み下さい。Circuit Breaker Power Disconnection Warning Page Equipment Installation 機器の設置 トレーニングを受け認定された人だけがこの装置の設置、交換、またはサービスを許可 されています。Restricted Area Battery Handling ةعناصلا ةمرشلا تاميلعحل اقفو ةلمعحسملا تايراطبلا نم صلخج Redundant Power Supplies Backplane Voltage Comply with Local and National Electrical Codes 地方および国の電気規格に準拠 機器の取り付けはその地方および国の電気規格に準拠する必要があります。Product Disposal 製品の廃棄Hot Swap Fan Warning ةحورمنا ةهتك يف تاحتفنا هع اديعب ءايشلأا هم اهريغو Power Cable and AC Adapter 電源コードとACアダプターPage Page Chapter Advanced Serverboard Setup Processor and Heatsink Installation Installing the ProcessorsTriangle Installing a Passive CPU Heatsink SNK-0043P HeatsinkConnecting Cables Connecting Data CablesConnecting Power Cables Connecting the Control PanelFront Control Panel Header Pins JF1 I/O PortsInstalling Memory Installing Memory ModulesTop View of DDR3 Slot Memory Support Per Channel Dimm Populations OptionsPossible System Memory Allocation & Availability Installing a PCI Add-on Card Adding PCI Expansion CardsPCI Expansion Slots Serverboard Details Super H8DGU-F LayoutJumper Description Default Setting H8DGU-F Quick ReferenceConnector Definitions Power ConnectorsPwon Connector Reset ConnectorPower On LED Overheat/Fan Fail LED OHNMI Button Universal Serial Bus Ports USB HeadersFan Headers Serial PortsUIO Power Connector SgpioPower LED/Speaker Chassis IntrusionOverheat LED ATX PS/2 Keyboard and PS/2 Mouse PortsCompact Flash Card PWR Connector Unit Identifier ButtonLAN1/2 Ethernet Ports Video Connector Trusted Platform Module HeaderJumper Settings Explanation of JumpersCmos Clear JBT1 Contact PadsWatch Dog Enable/Disable LAN1/2 Enable/DisableVGA Enable/Disable I2C to PCI-Express SlotOnboard Indicators Power LEDLAN1/LAN2 LEDs Dedicated Ipmi LAN LEDsSata Drive Connections Sata PortsInstalling the OS/SATA Driver Enabling Sata RAIDSerial ATA Sata Building a Driver DisketteEnabling Sata RAID in the Bios Bios Setup ScreenUsing the DotHill and Adaptec RAID Utility DotHill RAID Utility Program ScreenInstalling Software Installing the RAID Driver During OS InstallationSuperDoctor SuperDoctor III Interface Display Screen Health Information Serverboard Battery 11. Installing the Onboard BatteryPage Control Panel Drive Bays USB Ports 2 COM Port Slim DVD-ROM DriveUSB Ports COM1 Port VGA Port Ethernet Ports System Fans System Fan FailureDrive Bay Installation/Removal Accessing the Drive BaysInstalling a New Fan Replacing System FansSAS/SATA Drive Installation Installing/Removing Hot-swap SAS/SATA DrivesMounting a SAS/SATA Drive in a Drive Carrier Hard Drive Backplane Removing a SAS/SATA Drive Carrier Handle Release ButtonDVD-ROM Installation Accessing the Inside of the ChassisPower Supply Power Supply FailureRemoving/Replacing the Power Supply Removing the Power SupplyChapter IntroductionMain Menu Advanced Settings Menu  Boot FeatureSystem Time/System Date  Processor and Clock Options  Advanced Chipset Control  NorthBridge Configuration Bank Swizzle Mode ECC ModeDram ECC Enable Dram Timing Config IDE Configuration  Primary/Secondary/Third/Fourth IDE Master/SlavePIO Mode DMA ModeIDE Detect Timeout Sec A.R.T PCI/PnP Configuration  SuperIO Device Configuration  Remote Access Configuration Hardware Health Configuration  Acpi Configuration  Ipmi Configuration Set LAN Configuration  View BMC System Event LogBMC Watch Dog Timer Action IP Address SourceIP Address Subnet Mask Event Log Configuration Security MenuBoot Menu  Boot Device PriorityRetry Boot Devices  Hard Disk DrivesExit Menu Page Appendix a Bios Error Beep Codes Amibios Error Beep CodesPage Appendix B Installing Windows Installing the Windows OS for a RAID SystemInstalling the Windows OS for a Non-RAID System Appendix C System Specifications BiosServerboard Regulatory Compliance