Fig 1.
Fig 3.
Fig 2.
Fig 4.
Sequence for setting a waypoint. Fig. 1: While traveling, press WPT twice to call up the Find Waypoint screen (Fig. 2) and set a point. Fig.
3:A message says the waypoint has been saved. Fig. 4: vehicle continues on its way; the waypoint number is visible on map.
NOTE
The Quick Save method uses the default waypoint symbol until you edit an existing waypoint and change its symbol. (Edit Waypoint Symbol is described in Sec. 7.) After you have changed a waypoint symbol, the unit will remember the one you chose and use it the next time you "quick save" a waypoint. To revert back to the default symbol, edit a waypoint and choose it or use the Reset Options command (described in Sec. 8).
Create Waypoint on Map
1.Use the arrow keys to move the cursor to the place where you want to make a waypoint.
2.Press WPTWPT. The waypoint is saved and automatically given a name with a sequential number, such as "waypoint 001." The waypoint symbol and number appear on the map.
105