3.When you have finished removing all the items you want from the screen, press EXIT to return to the page display.
Overlay Data Shown with water speed selected (left). Press ENT to access REMOVE option (right). Press ENT again to remove item and return to the Overlay Data Shown screen.
To move overlaid data:
You may find it useful to rearrange data floating on your display window.
1.Press MENU↓ to OVERLAY DATAENT.
2.You'll see a list of the overlay data currently displayed. Select the item you want to move and press ENT→ to MOVEENT.
3.The data begins to flash on your screen. Use any combination of →, ←, ↑ and ↓ to move the data to a new location.
4.When satisfied, press EXITEXIT.
NOTE:
The Customize command and the Overlay Data command use the same information categories. The difference between the two commands is the Customize command is only used to modify pages with digital data boxes, while Overlay Data changes information floating on the screen. See Customize Page Displays, on page 79 for information on customizing data boxes.
To change displayed data font size:
1.From the Map or Sonar page, press MENU↓ to OVERLAY DATAENT.
2.Press ↓ or ↑ to select Data Typepress → or ← to change Data SizeEXIT.
The selected data type will be displayed in the new size. (To change the font size of another data type, repeat these steps, beginning with step two above.) You can also change the size of overlay data by choosing overlay size in the Data Information menu. Just select the overlay data
68