2.PAGES – Pressing this and the ← → arrow keys switches the unit between the four different page screens. (Satellite Status Page, Navigation Page, Map Page and Sonar Page.) Each page represents one of the unit's major operation modes.
3.MENU – Press this key to show the menus and submenus, which allow you to select a command or adjust a feature. This also accesses search functions for streets, intersections, addresses and highway exits.
4.ARROW KEYS – These keys are used to navigate through the menus, make menu selections, enter data and move the map and sonar chart cursors.
5.ENT/ICONS (Enter & Icons) – This key allows you to save data, accept values or execute menu commands. It is also used to create event marker icons.
6.EXIT – The Exit key lets you return to the previous screen, clear data and close menus.
7.WPT – (Waypoint) The Waypoint key is not only used to save, recall and search for waypoints, but also provides access to the waypoint list. It launches the
8.ZOUT – (Zoom Out) – This key lets you zoom out the sonar display. On the Sonar Page, it returns you to a full sonar chart display, showing the entire water column from surface to bottom. On the Map Page, the ZOUT key allows you to see a larger geographic area. Less detail is seen as you zoom out.
9.ZIN – (Zoom In) – This key lets you zoom in on the sonar display. On the Sonar Page, it enlarges fish signals and bottom detail. On the Map Page, zooming in lets you see greater detail in a smaller geographic area.
Power/lights on and off
To turn on the unit, press PWR. As the unit powers up, the Map Page is displayed first. To switch to the Sonar Page, press PAGES→EXIT.
To turn on the backlight, press PWR again. The unit has three backlight levels. Repeatedly pressing PWR will cycle through the backlight settings.
Turn off the unit by depressing the PWR key for 3 seconds.
40