Harbor Freight Tools 96902 operating instructions Settings, Using the Fish Finder in a boat

Page 4

6.The Transducer can be used directly in the water to look for Fish, but the Display unit should never be immersed.

Settings

1.Each option is selected by using the right or left arrow buttons. Toggle through the options by pushing the MENU POWER button. The menu screen turns off automatically, saving any changes, after five seconds.

2.Light allows the backlight to be turned on or off. Continuous operation of the backlight significantly decreases battery lifespan.

3.Sensitivity adjusts the level of sonar returns shown on the Display. A higher number will yield more returns and find more fish, whereas a lower number will remove clutter from the Display. The Fish Finder will not work well in areas where the water is especially murky or stirred up.

4.Depth Range allows manual selection of a specific depth to scan, or automatic depth range if put on “Auto”. If the depth of the water is greater than the depth range setting, the bottom will not be visible on screen.

5.Zoom allows the user to magnify the area on the bottom to better detect fish and objects.

6.Depth Alarm allows the unit to be set to sound an alarm when the depth becomes equal to, or greater than, the set level.

7.Fish Alarm can be set to sound an alarm when the Fish Finder has detected a fish.

8.Fish Icon; turning this feature off allows the user to see raw sonar data images instead of the Fish Finder’s graphics.

9.Chart Speed controls the rate at which information scrolls across the Display.

10.Depth Unit allows the user to choose whether depth information is presented in standard or metric units.

11.Temp Unit allows the user to choose whether temperature information is provided in Fahrenheit or Celsius.

Using the Fish Finder in a boat:

 

 

 

 

 

 

1.

The Fish Finder can work through the

Figure 1

 

 

 

 

 

hull of a boat, if it is of fiberglass or

 

 

 

 

thin aluminum construction. The Fish

 

 

 

 

Finder will not work through

 

 

 

 

aluminum more than 1/8” thick, wood,

 

 

 

 

plastic, or any composite material.

 

 

 

SKU 96902

For technical questions, please call 1-800-444-3353.

Page

Image 4
Contents For technical questions or replacement parts, please call Distributed exclusively by Harbor Freight ToolsSave This Manual For technical questions, please callUnpacking SpecificationsOperating Instructions Settings Using the Fish Finder in a boatMaintenance And Servicing Parts List Part Description QtyAssembly Diagram