Pioneer DRM-3000, DRM-7000 manual Connecting Scsi cables

Page 18

Installation

2Connect the power cable.

When the power cable has been connected, the wiring monitor indicator on the rear of the drive (orange) will light up.

When the termination switch of the drive is set to on, the termination indicator (green) will light up.

Power cable

Wiring monitor indicator

Termination indicator

3Connect the changer interface cable.

When the changer interface cable has been connected, the wiring monitor indicators will flash at two-second intervals.

Wiring monitor indicator

Changer interface cable

NOTE:

Connect the changer interface cable to the connector corresponding to the bay in which the drives have been installed. (Note that labels are affixed to connectors indicating the corresponding bay number.) Note that it is extremely important to do this, as connecting the changer interface cable to a neighboring bay will result in damage to discs and the disc transport mechanism.

3.Reading and self-checking the installed drive’s SCSI ID by the changer

If all drives have been assigned different SCSI IDs, a buzzer will sound once.

If the same SCSI ID has been assigned to two or more drives, a buzzer will sound three times.

NOTES:

If installed drives are to be connected to different SCSI buses, then the same SCSI ID assigned to each of the drives may be all right.

Even if none of the drives installed within a changer has been assigned the same SCSI ID, it is necessary to check that the same SCSI ID is not assigned to other devices (e.g., hard disks) on the same SCSI bus.

4. Connecting SCSI cables

After installing all drives and checking to make sure that they have been properly connected, install the SCSI interface cables.

NOTES:

Maximum usable SCSI cables length is 6 meters (including length of wiring inside changer). If the SCSI cable has extra unused connectors, connect the final (end) connector to the terminating drive; the extra intermediate connectors may be left unconnected if not required. (See page 19, "SCSI Cable Connection Example").

When installing 7 or more drives or when creating multi SCSI buses system for 6 drives or less, additional multi drive connector panels or single drive connector panels will be required.

When connecting the changer to a host computer, always be sure to first turn off the power to both the changer and the host computer. After the connections are finished, turn on the power to the changer before turning the power to the host computer back on.

The changer SCSI termination switch is set to ON at the time of shipment. Always make sure that the changer SCSI termination switch is set to OFF when the changer is not the last device in the SCSI chain.

Note that the DRM-7000/DRM-3000 is unable to recognize the existence of faulty SCSI cable connections or mistakes in the assignment of SCSI IDs, and for this reason you should always be sure to restart the host computer after installation to make sure that all drive units and the changer are properly recognized. This is the only way of confirming that all SCSI devices are installed properly.

18

<DRC1184> En

Image 18
Contents DRM-7000 For European and U.K. Models For U.S. modelEnglish IMPORTANT! Safety Instructions ContentsFeatures Ease of InstallationFlexible Unit Design For Safety Handling PrecautionsPOWER-CORD Caution Cleaning the ChangerSecurity Features Read Before USEOffline Media Management Disc magazine Deciding on System ConfigurationADD-ON Products DRM-AL751DVD-R/RW drive unit DVD-R7322 DRM-AF751Disc hyper magazine DRM-AH721 DVD-ROM drive unit DVD-D7563Items Included Handling the discs DiscsLock release key DRM-7000 DRM-3000 .. Operating instructionsTo Avoid Problems Disc Magazines Issue Potential Malfunction/Error Discs÷ Set Up NG error E83Front Front Access Door InsideNames and Functions of Individual Parts Control panelRear Access Door Inside RearStep InstallationConnect power cord Attach the base stabilizersReadying the changer for operation Turning on the powerInstalling drive units Loosening the shipping screwsConnecting Scsi cables English Scsi Cable Connection ExampleInserting disc magazines Example Loading magazine in front bayRelease knob Label Lock release Disc storage location Slot number Closing access doors Maintenance submodes User ModeSystem Administrator Mode OperationAuto probing Config submodeLog Contents Run-statistics Swap Remove Add Inquiry submodeConfig submode Operation when the rear bay has been selectedInquiry submode Operation when the magazine bay has been selected Option submode Auto probingHot start Auto ejectHyper I/E Alert buzzer Free messageContents Info submodeLog Run-statistics Mailslot submode SwapRemove Add Hyper submodeProbe submode Door submode How to add a drive Attach add-on connector panels, if necessaryAdding Drive Units Connect the power cable Connect the changer interface cablePress the ESC key How to exchange a drive Exchanging Drive UnitsInsert the new drive and connect the power cable Remove the driveConnect the Scsi interface cable English Troubleshooting OthersOthers Functional specifications SpecificationsDRM-7000 DRM-3000 General specifications Items includedPin layout of Scsi connectors Scsi connector specificationsMaintenance Electrical specifications of Scsi
Related manuals
Manual 1 pages 10.82 Kb Manual 52 pages 15.69 Kb Manual 1 pages 980 b

DRM-7000, DRM-3000 specifications

The Pioneer DRM-7000 and DRM-3000 are advanced digital radio receivers that cater to the needs of audiophiles and broadcasting professionals alike. Designed to deliver high-quality sound and reliable performance, these models exemplify Pioneer’s commitment to innovation in audio technology.

One of the standout features of the DRM-7000 is its support for a wide range of digital audio formats, including DAB, DAB+, and DRM. This flexibility enables users to access a plethora of radio stations and content across different broadcasting platforms. The device also boasts a crystal-clear LCD display that provides essential information such as station names, signal strength, and metadata, ensuring an enriching listening experience.

The DRM-3000, while slightly less advanced, also offers impressive capabilities with a focus on ease of use. It includes a user-friendly interface and straightforward navigation, allowing listeners to effortlessly browse through various channels. This model is aimed at users who prioritize simplicity without compromising audio quality.

Both receivers incorporate state-of-the-art digital signal processing technology, which minimizes distortion and enhances audio clarity. This technology ensures that users can enjoy their favorite broadcasts without interruptions or loss of sound fidelity. The DRM-7000, in particular, features enhanced audio tuning capabilities, allowing users to switch between stereo and mono outputs seamlessly.

In terms of connectivity, both models come equipped with multiple inputs and outputs, including USB, AUX, and headphone jacks. This versatility enables users to connect external devices and enjoy a variety of content, from music playlists to podcasts, all from one centralized unit. Additionally, the DRM-7000 includes Wi-Fi connectivity, allowing for the streaming of internet radio and expanded content variety.

Durability and design are also key characteristics of the Pioneer DRM series. Crafted with high-quality materials, these receivers not only prioritize performance but also aesthetic appeal. The compact and sleek design makes them an attractive addition to any home audio setup or professional broadcasting environment.

Furthermore, both devices come with robust support for firmware updates, ensuring that users can benefit from the latest technological advancements and features. With their combination of versatile audio formats, user-friendly interfaces, and durable design, the Pioneer DRM-7000 and DRM-3000 stand as leading choices in the landscape of digital radio receivers. They are ideal for anyone looking to elevate their listening experience, whether at home, in the studio, or on the go.