Pioneer DRM-3000 Inquiry submode, Config submode, Operation when the rear bay has been selected

Page 26

Operation

Inquiry submode

Inquiry submode is the entry to system administrator mode and also the exit to user mode. Here the DRM-7000/DRM- 3000 displays information its own. The data displayed is the same as that obtained when the host computer issues an SCSI INQUIRY command to the changer. Your changer’s current SCSI ID and the firmware revision is seen here.

Pressing the ENT key at this time then the changer’s model name and device ID (i.e., serial number) to be displayed.

Config submode

Config submode is the mode to browse the current status of the magazine bays and the rear bays. It may be used to make sure that all components currently installed in the changer have been properly recognized by the changer.

Pressing the ENT key causes the display to switch to the ‘select bay’ screen. Press the « or » key to select either the magazine bay or the rear bay.

Pressing the ESC key causes the display to return one level above from the message currently being displayed.

To change the changer’s SCSI ID, use the SCSI ID switch located at the lower left at the rear of the changer.

When the setting value of the SCSI ID switch is altered, the display will show a message like that shown below. (Note that the message shown here is the message which would be displayed when the SCSI ID is changed from ‘6’ to ‘5’.)

The SCSI ID will be updated only when the power to the changer is turned OFF and ON or the host computer resets the SCSI bus on which the changer is.

Operation when the rear bay has been selected

Pressing the ENT key first displays the component loaded in rear bay #1.

The bay number to be displayed is selected by pressing the » or « key.

Press » or « key

Press » or « key

Press » or « key

Example of display for DRM-7000

If the component that has been inserted in the bay displayed is a drive unit, it is possible to read out the SCSI ID, termination switch settings, and device ID of the drive in question.

Press the ENT key when the displayed is the bay in which a drive has been inserted, then it displays the above information.

26

<DRC1184> En

Image 26
Contents DRM-7000 For European and U.K. Models For U.S. modelEnglish IMPORTANT! Safety Instructions ContentsFlexible Unit Design FeaturesEase of Installation For Safety Handling PrecautionsPOWER-CORD Caution Cleaning the ChangerOffline Media Management Security FeaturesRead Before USE Disc magazine Deciding on System ConfigurationADD-ON Products DRM-AL751DVD-R/RW drive unit DVD-R7322 DRM-AF751Disc hyper magazine DRM-AH721 DVD-ROM drive unit DVD-D7563Items Included Handling the discs DiscsLock release key DRM-7000 DRM-3000 .. Operating instructionsTo Avoid Problems Disc Magazines Issue Potential Malfunction/Error Discs÷ Set Up NG error E83Front Front Access Door InsideNames and Functions of Individual Parts Control panelRear Access Door Inside RearStep InstallationConnect power cord Attach the base stabilizersReadying the changer for operation Turning on the powerInstalling drive units Loosening the shipping screwsConnecting Scsi cables English Scsi Cable Connection ExampleInserting disc magazines Example Loading magazine in front bayRelease knob Label Lock release Disc storage location Slot number Closing access doors Maintenance submodes User ModeSystem Administrator Mode OperationAuto probing Config submodeLog Contents Run-statistics Swap Remove Add Inquiry submodeInquiry submode Config submodeOperation when the rear bay has been selected Operation when the magazine bay has been selected Option submode Auto probingHot start Auto ejectHyper I/E Alert buzzer Free messageLog ContentsInfo submode Run-statistics Remove Mailslot submodeSwap Add Hyper submodeProbe submode Door submode Adding Drive Units How to add a driveAttach add-on connector panels, if necessary Connect the power cable Connect the changer interface cablePress the ESC key How to exchange a drive Exchanging Drive UnitsConnect the Scsi interface cable Insert the new drive and connect the power cableRemove the drive English Troubleshooting OthersOthers Functional specifications SpecificationsDRM-7000 DRM-3000 General specifications Items includedPin layout of Scsi connectors Scsi connector specificationsMaintenance Electrical specifications of Scsi
Related manuals
Manual 1 pages 10.82 Kb Manual 52 pages 15.69 Kb Manual 1 pages 980 b

DRM-7000, DRM-3000 specifications

The Pioneer DRM-7000 and DRM-3000 are advanced digital radio receivers that cater to the needs of audiophiles and broadcasting professionals alike. Designed to deliver high-quality sound and reliable performance, these models exemplify Pioneer’s commitment to innovation in audio technology.

One of the standout features of the DRM-7000 is its support for a wide range of digital audio formats, including DAB, DAB+, and DRM. This flexibility enables users to access a plethora of radio stations and content across different broadcasting platforms. The device also boasts a crystal-clear LCD display that provides essential information such as station names, signal strength, and metadata, ensuring an enriching listening experience.

The DRM-3000, while slightly less advanced, also offers impressive capabilities with a focus on ease of use. It includes a user-friendly interface and straightforward navigation, allowing listeners to effortlessly browse through various channels. This model is aimed at users who prioritize simplicity without compromising audio quality.

Both receivers incorporate state-of-the-art digital signal processing technology, which minimizes distortion and enhances audio clarity. This technology ensures that users can enjoy their favorite broadcasts without interruptions or loss of sound fidelity. The DRM-7000, in particular, features enhanced audio tuning capabilities, allowing users to switch between stereo and mono outputs seamlessly.

In terms of connectivity, both models come equipped with multiple inputs and outputs, including USB, AUX, and headphone jacks. This versatility enables users to connect external devices and enjoy a variety of content, from music playlists to podcasts, all from one centralized unit. Additionally, the DRM-7000 includes Wi-Fi connectivity, allowing for the streaming of internet radio and expanded content variety.

Durability and design are also key characteristics of the Pioneer DRM series. Crafted with high-quality materials, these receivers not only prioritize performance but also aesthetic appeal. The compact and sleek design makes them an attractive addition to any home audio setup or professional broadcasting environment.

Furthermore, both devices come with robust support for firmware updates, ensuring that users can benefit from the latest technological advancements and features. With their combination of versatile audio formats, user-friendly interfaces, and durable design, the Pioneer DRM-7000 and DRM-3000 stand as leading choices in the landscape of digital radio receivers. They are ideal for anyone looking to elevate their listening experience, whether at home, in the studio, or on the go.