Pioneer DRM-3000, DRM-7000 manual Press the ESC key

Page 40

Operation

NOTES:

If the changer interface cable has not been properly connected, the changer will not be able to recognize the drive at all. You should check the wiring monitor indicator located on the back of the drive. When the cables have been properly connected, the indicator ought to be flashing.

=If the indicator is lit, check to make sure that the changer interface cable of the drive in question has been properly connected.

=If the indicator is not lit, check to make sure that the power cable of the drive in question has been properly connected. If the cables need to be reconnected, reconnect the power cable before reconnecting the changer interface cable.

If the drive is recognized but the model name of the drive is not displayed in the lower half of the LCD message window, disconnect all three cables and reconnect them again.

Order in which cables are to be disconnected:

1.SCSI interface cable

2.Changer interface cable

3.Power cable

Order in which cables are to be reconnected:

1.Power cable

2.Changer interface cable

3.SCSI interface cable

9.To view the settings for all drives which have been recognized, press the ENT key to proceed to the next layer in the message display.

The SCSI ID, termination switch setting, and unique device ID of each drive will be read in and displayed at the same time on the same message window.

If four drives have been connected in a daisy chain configuration and termination has been turned on for the fourth drive in the chain, the messages displayed will be as indicated below.

Press the ENT key

Press the ESC key to return to the previous message

and then press the » key

Press the ENT key

Press the ESC key to return to the previous message

and then press the » key

Press the ENT key

Press the ESC key to return to the previous message

and then press the » key

Press the ENT key

NOTES:

If the SCSI IDs or termination switch settings displayed differ from those which set on the backs of drives, or if a drive’s device ID fails to be displayed, it is likely that the corresponding cables were improperly connected. If this happens, follow the steps outlined below to properly reconnect all the cables.

Order in which cables are to be disconnected:

1.SCSI interface cable

2.Changer interface cable

3.Power cable

Order in which cables are to be reconnected:

1.Power cable

2.Changer interface cable

3.SCSI interface cable

If the device ID of a drive cannot be read, then it will be impossible for the host computer to perform automatic configuration.

10.Press the ESC key several times to return to user mode and close the rear access door.

Press the ESC key

40

<DRC1184> En

Image 40
Contents DRM-7000 For European and U.K. Models For U.S. modelEnglish IMPORTANT! Safety Instructions ContentsEase of Installation FeaturesFlexible Unit Design Handling Precautions POWER-CORD CautionFor Safety Cleaning the ChangerRead Before USE Security FeaturesOffline Media Management Deciding on System Configuration ADD-ON ProductsDisc magazine DRM-AL751DRM-AF751 Disc hyper magazine DRM-AH721DVD-R/RW drive unit DVD-R7322 DVD-ROM drive unit DVD-D7563Items Included Discs Lock release keyHandling the discs DRM-7000 DRM-3000 .. Operating instructionsTo Avoid Problems Issue Potential Malfunction/Error Discs ÷ Set Up NG errorDisc Magazines E83Front Access Door Inside Names and Functions of Individual PartsFront Control panelRear Access Door Inside RearInstallation Connect power cordStep Attach the base stabilizersTurning on the power Installing drive unitsReadying the changer for operation Loosening the shipping screwsConnecting Scsi cables English Scsi Cable Connection ExampleInserting disc magazines Example Loading magazine in front bayRelease knob Label Lock release Disc storage location Slot number Closing access doors User Mode System Administrator ModeMaintenance submodes OperationConfig submode Log Contents Run-statistics Swap Remove AddAuto probing Inquiry submodeOperation when the rear bay has been selected Config submodeInquiry submode Operation when the magazine bay has been selected Option submode Auto probingHot start Auto ejectHyper I/E Alert buzzer Free messageInfo submode ContentsLog Run-statistics Swap Mailslot submodeRemove Add Hyper submodeProbe submode Door submode Attach add-on connector panels, if necessary How to add a driveAdding Drive Units Connect the power cable Connect the changer interface cablePress the ESC key How to exchange a drive Exchanging Drive UnitsRemove the drive Insert the new drive and connect the power cableConnect the Scsi interface cable English Troubleshooting OthersOthers Specifications DRM-7000 DRM-3000 General specificationsFunctional specifications Items includedScsi connector specifications MaintenancePin layout of Scsi connectors Electrical specifications of Scsi
Related manuals
Manual 1 pages 10.82 Kb Manual 52 pages 15.69 Kb Manual 1 pages 980 b

DRM-7000, DRM-3000 specifications

The Pioneer DRM-7000 and DRM-3000 are advanced digital radio receivers that cater to the needs of audiophiles and broadcasting professionals alike. Designed to deliver high-quality sound and reliable performance, these models exemplify Pioneer’s commitment to innovation in audio technology.

One of the standout features of the DRM-7000 is its support for a wide range of digital audio formats, including DAB, DAB+, and DRM. This flexibility enables users to access a plethora of radio stations and content across different broadcasting platforms. The device also boasts a crystal-clear LCD display that provides essential information such as station names, signal strength, and metadata, ensuring an enriching listening experience.

The DRM-3000, while slightly less advanced, also offers impressive capabilities with a focus on ease of use. It includes a user-friendly interface and straightforward navigation, allowing listeners to effortlessly browse through various channels. This model is aimed at users who prioritize simplicity without compromising audio quality.

Both receivers incorporate state-of-the-art digital signal processing technology, which minimizes distortion and enhances audio clarity. This technology ensures that users can enjoy their favorite broadcasts without interruptions or loss of sound fidelity. The DRM-7000, in particular, features enhanced audio tuning capabilities, allowing users to switch between stereo and mono outputs seamlessly.

In terms of connectivity, both models come equipped with multiple inputs and outputs, including USB, AUX, and headphone jacks. This versatility enables users to connect external devices and enjoy a variety of content, from music playlists to podcasts, all from one centralized unit. Additionally, the DRM-7000 includes Wi-Fi connectivity, allowing for the streaming of internet radio and expanded content variety.

Durability and design are also key characteristics of the Pioneer DRM series. Crafted with high-quality materials, these receivers not only prioritize performance but also aesthetic appeal. The compact and sleek design makes them an attractive addition to any home audio setup or professional broadcasting environment.

Furthermore, both devices come with robust support for firmware updates, ensuring that users can benefit from the latest technological advancements and features. With their combination of versatile audio formats, user-friendly interfaces, and durable design, the Pioneer DRM-7000 and DRM-3000 stand as leading choices in the landscape of digital radio receivers. They are ideal for anyone looking to elevate their listening experience, whether at home, in the studio, or on the go.