Insignia 105SX manual Transducer Exchange, Beginning Installation

Page 7

INSTALLATION PREPARATION

TRANSDUCER EXCHANGE

TRANSDUCER EXCHANGE

Other transducers are available as replacements for the standard transducer. You may exchange your new and unassembled transducer for another type by returning it to the address listed in Customer Support. Some transducers may have additional costs. Refer to the Accessory cata- log or call Customer Support for information.

BEGINNING INSTALLATION

Now that you have determined the transducer mounting method, you can begin installation of the 105SX. The fold out installation guide included provides detailed step by step instructions for installation of the control head and transducer. For transom mount transducer installations, you will need the mounting template in the center of this manual.

In addition to the parts included you need the following for installation and operation:

•A powered hand drill and various drill bits

•Phillips and flat-head screw drivers

•A ruler or measuring tape

•Pen or pencil

•12 volt power source (your boat’s battery)

•A 1-amp fuse

•A fuse holder (if you are wiring directly to the boat’s battery)

•Silicone sealant (for sealing drilled holes)

•2-part, slow-cure epoxy (for inside the hull transducer installations)

5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Operations Manual Thank YOU Table of Contents Parts Supplied Installation PreparationAccessories Installation OverviewDetermining How to Mount the Transducer Installation OverviewTrolling Motor Mounting Alternate Transducers and Mounting MethodsAlternate Transducers and Mounting Methods Portable MountingTransducer Exchange Beginning InstallationTransducer Exchange HOW Sonar Works Using the 105SXHOW Sonar Works Simulator Operation Feature MemorySimulator Operation What You See On-Screen What YOU see ON-SCREENWhen in Auto mode, the horizontal What YOU see on Screen Control Functions Control FunctionsUsing the 105SX Range of Adjustment Indicator Menu Functions Menu FunctionsUsing the 105SX Depth Range Upper Zoom Limit On the right side of the display. Zoom can Using the 105SX Bottom Black. There are two Raw Sonar ID+ On Using the Diagnostic Feature Advanced FeaturesUsing the Diagnostic Feature Maintenance Maintenance and WarrantyMaintenance Troubleshooting TroubleshootingNothing happens when I turn the unit on There is no bottom reading visible on the display There is no transducer detectedMy unit loses power at high speeds Unit comes on before I press POWER, and won’t turn offGet gaps in the reading at high speeds Humminbird ONE Year Full Warranty WarrantyService Policy Service PolicyCustomer Resource Center Customer Resource CenterTOP Specifications
Top Page Image Contents