Insignia 105SX manual What YOU see ON-SCREEN, What You See On-Screen

Page 10

USING THE 105SX

WHAT YOU SEE ON-SCREEN

If you are using the 105SX in Simulator when no transducer is connected, any selected options are lost when the unit is powered off. The 105SX will return to Factory Settings, or options selected when last used with a transducer, if no transducer is connected.

IMPORTANT: A transducer must be connected to the 105SX in order to retain user settings selected when in simulator mode. If no transducer is detected, the unit defaults to pre-selected options when powered off.

What You See On-Screen

Figure A

Your 105SX uses a 128 x 64 matrix FSTN LCD display. This display provides outstanding viewability in all light conditions over a wide range of temperatures.

At initial power-up, the 105SX uses settings that were set at the factory. After initial use, the 105SX will remember the settings you enter.

There are several elements on-screen that are common to all modes of operation.

Speed/Temperature. The initial screen layout takes one of two basic forms depending on presence of accessories such as Temperature or Speed/Temperature sensors. Figure A shows the default view when the Speed/Temp or Temperature accessory is installed. Figure B shows the default view when no accessory is installed.

Depth. The digital depth number shows the water depth directly beneath the transducer location.

Depth Range. The depth range is shown to the right of the screen. The upper number is 0 indicating the surface of the water. The lower number is one of the nine depth ranges available that best match the depth of the water. As the depth of the water changes, the range changes as necessary in order to retain a bottom representation on-screen.

8

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Operations Manual Thank YOU Table of Contents Installation Overview Installation PreparationAccessories Parts SuppliedInstallation Overview Determining How to Mount the TransducerPortable Mounting Alternate Transducers and Mounting MethodsAlternate Transducers and Mounting Methods Trolling Motor MountingTransducer Exchange Beginning InstallationTransducer Exchange HOW Sonar Works Using the 105SXHOW Sonar Works Simulator Operation Feature MemorySimulator Operation What YOU see ON-SCREEN What You See On-ScreenWhen in Auto mode, the horizontal What YOU see on Screen Control Functions Control FunctionsUsing the 105SX Range of Adjustment Indicator Menu Functions Menu FunctionsUsing the 105SX Depth Range Upper Zoom Limit On the right side of the display. Zoom can Using the 105SX Bottom Black. There are two Raw Sonar ID+ On Using the Diagnostic Feature Advanced FeaturesUsing the Diagnostic Feature Maintenance Maintenance and WarrantyMaintenance Troubleshooting TroubleshootingNothing happens when I turn the unit on There is no transducer detected There is no bottom reading visible on the displayMy unit loses power at high speeds Unit comes on before I press POWER, and won’t turn offGet gaps in the reading at high speeds Warranty Humminbird ONE Year Full WarrantyService Policy Service PolicyCustomer Resource Center Customer Resource CenterSpecifications TOP
Top Page Image Contents