Simrad MN000802A-G manual kw Radar overview

Page 10

GlobalMap 9300c HD GlobalMap 9200c GlobalMap 8300c HD GlobalMap 8200c GlobalMap Baja 840c GlobalMap 7300c HD GlobalMap 7200c Globalmap 5200c Globalmap 5300c iGPS Globalmap Baja 540c LCX-113c HD LCX-112c

LCX-38c HD LCX-37c LCX-28c HD LCX-27c LMS-520c LMS-522c iGPS LMS-525c DF LMS-527c DF iGPS X510c

X515c DF

To ensure that scanners have the correct brand decal please ensure that scanner part number ends in LOW, for Lowrance branding

e.g AA010024LOW

3.1 2 kw Radar overview

The 2 kW radar system is intended for use in a marine environment. It consists of a Scanner protected by a 450mm diameter dome connected to the 2 kW radar processor module by a prefabricated 15m (49ft) interconnection cable (AA010088), The cable is attached to the dome at the factory. A longer 20m (65.5 ft) cable is also available which has to be ordered separately and will need to be exchanged by a qualified radar technician.

Note Changing the scanner cable should only be done by a qualified radar technician.

Image 10

Contents KW Radar Industry Canada KW Radar Installation ManualFCC Statement CE ComplianceWarranty Feedback from youContents Connect Northstar 6000i MaintenanceConnect Simrad NX40 / NX45, Northstar M84 / M121 Connect to Lowrance Displays13 2 kW radar system specifications Serial Connectivity PrefaceEthernet Connectivity Please Read Carefully Before USEPage Brand Display heads that support the Navico radar system Introduction to the Navico radar systemBranding information 2 kw Radar overview Serial Connectivity Install the radar Choose the scanner location Dont do thisPower boat installations How to find the optimum height for the scanner Yacht installationsScanner model Value half the -3 dB beam Width How to find the theoretical maximum detection range How to reduce false echoes and shadow zones 2 kW scanner dimensionsInstall a scanner on a trestle Install the 2 kW scanner unitInstall the radar processor Check the 2 kW radar parts Page Page Wiring guidelines Page Page Page Yellow #24 White big #12 Shell Braid shield 2 kW radar processor connections Connect the power cable OnlyConnect the ground wire Radar system checklistEthernet Cables Simrad GB40 and Northstar Connect Simrad GB40 or NorthstarParts needed to connect radar to a GB40 or 8000i system Ethernet Crossover cableOptional parts to connect GB40 Optional parts to connect GB40 onlyAT10-HD Simrad GB40 connection using SimNet heading Northstar 8000i / Simrad GB 40 using Nmea 0183 heading Key Part Description NumberPage ¾ tarting up Radar Commision the radar using a GB40 orPin Function ¾ To enter Radar setup options ¾ Set Radar Range offset trigger Delay¾ Select OK to confirm the new setting ¾ To correctRadar Power on Action Radar informationParts needed Connect Simrad NX40 / NX45, Northstar M84 / M121Radar connection kit AA002461 Quanti Part name Connect the 2 kW radar processor to an M84 or M121 Display NOR¾ Park position Set up the radar with the Northstar M84 or M121¾ To enable the radar functionality ¾ Zero bearing¾ Antenna height Parts needed to connct to a Northstar 6000i Connect Northstar 6000iSerial comms extension cables + adaptor Quanti Part name Connect the 2 kW radar processor to a 6000i or 6100i display Nmea AUXPage Nmea 1 in a Remote Power OUT ShieldPower Nmea 1 in BPage ¾ Power on Option Before you turn on the radar for the first time ¾ Turn on the radar as follows¾ Turn the radar off Turn the radar onConfigure the navigator communications Adjust the appearance settingsCalibrating the radar Disable the heading sensor inputHeading sensor requirements Prepare for calibrationSet the STC Curve Set the trigger delayTune the radar ¾ To select a different curvePress Page 3, Page 4, and Install Set the heading calibration heading sensor installedPress Page 2, Page 3, Page 4, and Install Restore all the factory settings Set the heading calibration heading sensor not installedRestore the factory appearance settings ¾ Next, set the scale to 1/8 nautical miles as follows Manual tuning procedure for the 6000i or 6100i systemPress Sea Clutter RIM300 Radar Interface Module Quantit Part name Connect to Lowrance DisplaysParts needed to connect to Lowrance displays Heading Sensor Optional Quantit Part Name10.2 RIM300 Setup the radar with Lowrance displays Setup the basics Radar Setup ¾ Trigger Delay PreparationTrigger Delay Main Bang SuppressionAdjust Main Bang Suppression Before heading line adjustment After heading line adjustment General maintenance MaintenanceScanner maintenance Other maintenance items Radar is not operating correctly Technical support, service and repairsTroubleshoot the radar If the scanner fails to turnMake sure the power is present and correctly wired How to reduce noise and interferenceConfirm the equipment installed Are range rings displayed? Make Model Serial Number Software VersionKW scanner 13 2 kW radar system specificationsDC input To 15.6 V DC DC 12 V system only KW Radar processor specifications NS-RDR-1021MD