Standard Horizon MDS-10-4, MDS-8 manual Chart Plotters Software Update, Backing up Marks and Routes

Page 19

Port Setup

When an optional Radar Antenna is connected, Port 1 of the NMEA In/Out Communication Setup menu must be changed to RADAR as shown below for communications.

1.From the Chart page, press [MENU]. Move the ShuttlePoint knob to highlight SETUP MENU and press [ENT].

2.Move the ShuttlePoint knob to highlight ADVANCED SETUP and press [ENT].

3.Move the ShuttlePoint knob to highlight IN/OUT CONNECTIONS and press [ENT].

4.Move the ShuttlePoint knob to highlight PORT 1 INPUT and press [ENT].

5.Move the ShuttlePoint knob up/down to select RADAR and press [ENT].

6.Press [CLR] or move the ShuttlePoint knob to the left until the Chart page is shown.

2.8CHART PLOTTERS SOFTWARE UPDATE

The Software CARD is used to update the software in the Chart Plotter to be compatible with the Radar.

NOTE

Updating the software in the Chart Plotters with this Software CARD will erase all Marks and Routes that you have stored. Please read carefully the following paragraphs.

2.8.0Backing up Marks and Routes

If you have created Marks and Routes you will need to either make note and manually re- enter them or purchase a optional User C-CARD.

Refer to the Chart Plotters’s Owner's Manual for backing up the points.

2.8.1Installing Software

Once you have backed up your User Points:

1.Turn off the Chart Plotter and insert the Software CARD into any C-CARD slot on the Chart Plotter.

2.Press and hold [PWR] until the Chart Plotter beeps, then release the key.

3.Wait until the Start screen is shown, then remove the CARD.

4.The software is now updated and the Chart Plotter is compatible with the Radar.

Figure 2.8.1 - Example of Start Up screen

Radar Installation Manual

 

Page 21

 

Image 19
Contents MDS-10-4/MDS-10-5 SI-TEX RadarCode Issue a 170108e High Voltage Warning Microwave Radiation Hazard Safety PrecautionsMagnetron Preheating Table of Contents Index General Information IntroductionConventions Used IntroductionProduct Support Inquiries Packing List Replacement PartsOptions Cable InstallationInstallation Considerations Prepare the Radar for InstallationElectrical and Data Connections Installation ProcedureAntenna Cable Connection ProcedureTerminal C Radar Junction BOX ConnectionsDome Connections Radar Antenna ConnectionsOpen Array Connections Port Setup Chart Plotter Connections and SET UP0 CP180 & CP180i Connections 1 CP300 & CP300i Connections 1 CP300 & CP300i ConnectionsACC Cable 2 CPV350 ConnectionsACC 1 Cable 3 CP500 ConnectionsCable 4 CPV550 ConnectionsInstalling Software Chart Plotters Software UpdateBacking up Marks and Routes Radar Installation Manual Features MDS-1 MDS-8 MDS-9 MDS-10-4/MDS-10-5 Technical SpecificationsMDS-1 Antenna Unit 1 Radar MDS-1 Dimensions and Mounting1 Radar MDS-8 MDS-8 Antenna Unit1a Radar MDS-8 MDS-9 Antenna Unit1 Radar MDS-9 MDS-10-4/MDS-10-5 Antenna Unit Weight 21.2 Kg 47lb 4 feet Weight 21.9 Kg 49lb 5 feet Radar Installation Manual Antenna GeneralSide Lobe Targets difficult to display on screen Characteristics of Radar WaveShadow zones of radar Ghost echoes False echoesMultiple echoes Distant False echoes caused by duct phenomenon False echoes caused by side lobeRadar interference Or eliminate the interference Radar Installation Manual Shifting from keel line More Installation ConsiderationsObtaining sufficient dip angle Figure B.1 Installing scanner unit Installing Scanner Unit24, 25, 27 IndexPlease Note

MDS-9, MDS-8, MDS-10-5, MDS-10-4, MDS-1 specifications

Standard Horizon's MDS series of marine radios is widely recognized for its reliable performance and advanced features, catering to the needs of boaters and mariners around the world. Let's delve into the main features, technologies, and characteristics of the MDS-1, MDS-10-4, MDS-10-5, MDS-8, and MDS-9 models.

The MDS-1 is a compact yet robust digital selective calling (DSC) radio, designed for ease of use in emergencies. It incorporates a built-in GPS receiver, allowing users to easily transmit their location in distress situations. The MDS-1 features a waterproof design with a high IP rating, ensuring it performs well even in challenging marine environments. The user-friendly interface and large buttons make it accessible for all boaters, while its lightweight construction allows for easy installation on various vessels.

The MDS-10-4 offers advanced digital capabilities, featuring a four-channel simultaneous receiver. This enables users to monitor multiple channels at once, improving situational awareness. With its robust build and exceptional audio quality, the MDS-10-4 also boasts Bluetooth connectivity, allowing seamless communication with compatible devices. This radio is equipped with a clear, backlit LCD screen for easy operation in low-light conditions, making it an ideal choice for nighttime navigation.

The MDS-10-5 goes one step further, offering enhanced functionalities and an impressive five-channel simultaneous reception feature. It comes with customizable channel settings and supports various communication modes, including VHF, AIS, and DSC. The integrated GPS and built-in loudspeakers provide clear audio output, ensuring critical information is received promptly. The MDS-10-5 is an essential tool for professional mariners who require reliable communication and navigation capabilities.

The MDS-8 model stands out for its user-friendly design, making it suitable for recreational boaters. It features a simple interface with intuitive controls, allowing users to access the most important functions with ease. The MDS-8 is equipped with advanced noise-canceling technology that enhances audio clarity, even in noisy marine environments. Its compact size makes it an excellent addition for space-conscious boaters.

Finally, the MDS-9 combines portability with performance, offering a lightweight design and rechargeable battery option. It features a rugged construction that ensures durability while providing essential functions like weather alerts, making it a vital tool for staying safe on the water. The MDS-9 is particularly favored by those who enjoy day trips or coastal cruising, as its reliable communication capabilities enhance safety and reassurance.

Overall, the Standard Horizon MDS series showcases a commitment to quality and innovation, providing users with essential tools for safe and effective maritime communication.