Standard Horizon MDS-10-4 Chart Plotter Connections and SET UP, 0 CP180 & CP180i Connections

Page 14

2.7CHART PLOTTER CONNECTIONS AND SET UP

The following instructions refer to Dome Antennas; refer to Open Array for connections.

2.7.0CP180 & CP180i Connections

PWR & ACC 1 Cable

PLOTTER CABLE

WIRE COLOR FUNCTION

GREEN GND

No connection AUX OUT+

BROWN (Port 1) OUTPUT+ (TX+)

BLUE (Port 1) INPUT+ (RX+)

BLACK POWER- /GND

REDPOWER+

A switch MUST be connected to turn the Radar On or Off

Radar

Switch

 

 

RADAR CABLE

 

WIRE COL.

FUNCTION

 

BLACK

DATA GROUND

 

 

ORANGE

DATA OUT+

 

 

YELLOW

DATA OUT-

 

 

BROWN

DATA IN+

 

 

RED

DATA IN-

 

 

GREEN

POWER ON/OFF SWITCH

 

BLUE

POWER ON/OFF SWITCH

 

BLACK

RADAR BATTERY GROUND

 

 

WHITE

RADAR BATTERY POSITIVE

 

Battery Switch

Breaker panel

Battery

Figure 2.7.0 - CP180 & CP180i Connections

Port Setup

When an optional Radar Antenna is connected, Port 1 of the NMEA In/Out Communication Setup menu must be changed to RADAR as shown below for communications.

1.From the Chart page, press [MENU]. Move the ShuttlePoint knob to highlight SETUP MENU and press [ENT].

Page 16

 

Radar Installation Manual

 

Image 14
Contents SI-TEX Radar MDS-10-4/MDS-10-5Code Issue a 170108e Safety Precautions High Voltage Warning Microwave Radiation HazardMagnetron Preheating Table of Contents Index Introduction IntroductionConventions Used General InformationOptions Replacement PartsProduct Support Inquiries Packing List Prepare the Radar for Installation InstallationInstallation Considerations CableInstallation Procedure Electrical and Data ConnectionsConnection Procedure Antenna CableRadar Junction BOX Connections Terminal COpen Array Connections Radar Antenna ConnectionsDome Connections 0 CP180 & CP180i Connections Chart Plotter Connections and SET UPPort Setup 1 CP300 & CP300i Connections 1 CP300 & CP300i Connections2 CPV350 Connections ACC Cable3 CP500 Connections ACC 1 Cable4 CPV550 Connections CableBacking up Marks and Routes Chart Plotters Software UpdateInstalling Software Radar Installation Manual MDS-1 Antenna Unit Technical SpecificationsFeatures MDS-1 MDS-8 MDS-9 MDS-10-4/MDS-10-5 Dimensions and Mounting 1 Radar MDS-1MDS-8 Antenna Unit 1 Radar MDS-8MDS-9 Antenna Unit 1a Radar MDS-81 Radar MDS-9 MDS-10-4/MDS-10-5 Antenna Unit Weight 21.2 Kg 47lb 4 feet Weight 21.9 Kg 49lb 5 feet Radar Installation Manual Side Lobe GeneralAntenna Shadow zones of radar Characteristics of Radar WaveTargets difficult to display on screen Multiple echoes False echoesGhost echoes Radar interference False echoes caused by side lobeDistant False echoes caused by duct phenomenon Or eliminate the interference Radar Installation Manual Obtaining sufficient dip angle More Installation ConsiderationsShifting from keel line Installing Scanner Unit Figure B.1 Installing scanner unitIndex 24, 25, 27Please Note

MDS-9, MDS-8, MDS-10-5, MDS-10-4, MDS-1 specifications

Standard Horizon's MDS series of marine radios is widely recognized for its reliable performance and advanced features, catering to the needs of boaters and mariners around the world. Let's delve into the main features, technologies, and characteristics of the MDS-1, MDS-10-4, MDS-10-5, MDS-8, and MDS-9 models.

The MDS-1 is a compact yet robust digital selective calling (DSC) radio, designed for ease of use in emergencies. It incorporates a built-in GPS receiver, allowing users to easily transmit their location in distress situations. The MDS-1 features a waterproof design with a high IP rating, ensuring it performs well even in challenging marine environments. The user-friendly interface and large buttons make it accessible for all boaters, while its lightweight construction allows for easy installation on various vessels.

The MDS-10-4 offers advanced digital capabilities, featuring a four-channel simultaneous receiver. This enables users to monitor multiple channels at once, improving situational awareness. With its robust build and exceptional audio quality, the MDS-10-4 also boasts Bluetooth connectivity, allowing seamless communication with compatible devices. This radio is equipped with a clear, backlit LCD screen for easy operation in low-light conditions, making it an ideal choice for nighttime navigation.

The MDS-10-5 goes one step further, offering enhanced functionalities and an impressive five-channel simultaneous reception feature. It comes with customizable channel settings and supports various communication modes, including VHF, AIS, and DSC. The integrated GPS and built-in loudspeakers provide clear audio output, ensuring critical information is received promptly. The MDS-10-5 is an essential tool for professional mariners who require reliable communication and navigation capabilities.

The MDS-8 model stands out for its user-friendly design, making it suitable for recreational boaters. It features a simple interface with intuitive controls, allowing users to access the most important functions with ease. The MDS-8 is equipped with advanced noise-canceling technology that enhances audio clarity, even in noisy marine environments. Its compact size makes it an excellent addition for space-conscious boaters.

Finally, the MDS-9 combines portability with performance, offering a lightweight design and rechargeable battery option. It features a rugged construction that ensures durability while providing essential functions like weather alerts, making it a vital tool for staying safe on the water. The MDS-9 is particularly favored by those who enjoy day trips or coastal cruising, as its reliable communication capabilities enhance safety and reassurance.

Overall, the Standard Horizon MDS series showcases a commitment to quality and innovation, providing users with essential tools for safe and effective maritime communication.