Cobra Electronics XRS 9940 IntelliShield Highway/City Modes, Muting an Alert

Page 7

Getting Started

Your Detector

Display Timeout Mode

Your detector has a Display Timeout mode to prolong the life of your screen. Touch any button to exit Display Timeout and recall the Standby screen.

The factory default is for Display Timeout to engage from the Standby screen after 30 seconds. You can change the time interval or deactivate Display Timeout in programming mode (see page 10).

NOTE

In Display Timeout mode, the display will show a small dot moving slowly back and forth to indicate the unit is turned on.

IntelliShield Highway/City Modes

Your detector is equipped with IntelliShield false signal rejection technology which consists of a Highway mode and three different levels of City modes: City X, City X Beep Off and City X+K.

Highway mode provides full response to all signals detected. The City modes reduce false alerts while you are driving in or near urban areas where there are many sources for conflicting X or K band signals such as microwave towers and automatic door openers. The factory setting is Highway. The factory City mode default setting is City X; it can be changed in programming mode (see page 11).

You can toggle between Highway and City modes by pressing the City￿button.

City￿Button

Press and release

NOTE

When you change to City mode, the unit will enter whichever city default mode is set at the time.

8English

Getting Started

Your Detector

Muting an Alert

Your detector allows you to quickly turn off an Audio Alert by momentarily pressing the Mute￿button. If you press the Mute￿button a second time during the alert, the Audio Alert will be turned back on. After the current alert is gone, the next alert will be heard.

Mute￿Button

Press and release

Two other features are incorporated in your detector to automatically mute or reduce the volume of alerts. See pages 14 and 16 for Intellimute and Auto Mute modes.

Auxiliary Audio Jack

The Auxiliary Audio Jack can be used to connect external speakers in environments with high ambient noise levels. The internal speaker will be disconnected. (This uses a mini stereo audio connector.)

Auxiliary

Audio Jack

Nothing Comes Close to a Cobra® 9

Image 7
Contents Customer Assistance Cobra line of quality products includesImportant Information Customer Assistance Important InformationControls, Indicators, Connections and Display Controls, Indicators Connections and DisplayProduct Features Accessories Order InfoContents Overview InstallationDashboard Mounting Windshield MountingDisplay Brightness Control Power On/OffGetting Started Standby Screen IconsMuting an Alert IntelliShield Highway/City ModesAuxiliary Audio Jack EasySet Programming Buttons To use EasySet program modeEasySet Programming EasySet ProgrammingSetting Selection Buttons Program Flow DiagramsUser Settings Programming Alert Settings ProgrammingSet IntelliMute SettingsUser Settings IntelliShield City Mode Default IntelliMute ModeSet Compass Auto Mute ModeVoice or Tone Mode Compass ModeCar Battery Voltage Display Mode SmartPower ModeDisplay Timeout Dim Mode Default Display BrightnessSettings Detection Type of Signal Visual Display Voice LTI Laser Alert Type of SignalPop Detection Type of Signal Visual Display VoiceType of Signal Visual Display Voice VG-2 Alert Instant-On DetectionVG-2 and Spectre Safety Alert Traffic Warning SystemUnderstanding Radar and Laser Strobe AlertSpecifications MaintenanceSpecifications Maintenance Maintenance of Your Radar DetectorLimited 1-Year Warranty Warranty Product ServiceProduct Service Trademark Acknowledgement AccessoriesOptional Accessories Trademark AcknowledgementAppendix Mode Tone Visual Voice DisplaySet Ku Two Ku On Band Beeps Set Safety Detect Mode One Pop On VG-2 BeepDetect Beeps Spectre Mode One Off Off Audio Mode