EasySet Programming
Your Detector
EasySet Programming
•
EasySet Programming gives you quick and easy access to all the settings on your detector. It is used to program both:
■User Settings (see pages 14 and 15)
User Programming Menu Guide (see pages 34 and 35).
■Alert Settings (see page 20)
Alert Programming Menu Guide (see page 36).
Refer also to the Program Flow Diagrams for User Settings and Alert Settings programming to easily navigate to the setting you want to change (see pages 12 and 13). All settings are stored in memory when the power is turned off and will be recalled when the power is turned back on.
NOTE
You cannot enter Program mode during an alert. The unit will not detect signals while in Program mode. During programming, if no buttons are pressed for 15 seconds, the unit will automatically exit Program mode and save the most recent settings.
EasySet Programming Buttons:
CityButton
Press to move to desired setting.
Menu/Save Button Press to reach the opening program screen.
Dim Button | MuteButton |
Press to move to | Press to choose an |
desired setting. | option within the setting. |
10 English
EasySet Programming
Your Detector
To use EasySet program mode:
1.Press the Menu/Save button to reach the opening program screen.
2.Choose whether you want to change:
a.User Settings — press the Dimbutton to enter the User Setting loop (see page 12)
b.Alert Settings — press the Citybutton to enter the Alert Setting loop (see page 13)
3.Press the Cityor Dimbuttons to step forward or backward through the chosen settings loop until the desired option is reached.
NOTE
Press and release the button to move one option.
4.Press the Mutebutton to toggle the option on or off or to step through its multiple choices.
5.Repeat steps 3 and 4 to move to and set the next desired option(s).
6.Press the Menu/Save button when finished to save the settings and exit EasySet program mode. Or, simply wait 15 seconds without pressing any buttons.
NOTE
If power is turned off while in Program mode, option settings are saved to those in effect before Program mode was entered.
Nothing Comes Close to a Cobra® 11