Furuno NX-300 manual User Display

3.Press the [ENT] key to show the USER DISPLAY menu. The cursor is now on the LARGE field. LARGE means the center indication on the nav data display.

Figure 3-8 USER DISPLAY

4.Press the [ENT] key. The following window appears.

Figure 3-9 Options for LARGE window

5.Operate the Omnipad to select item desired. (SPD: Speed, CSE: Course, RNG: Range to

destination, BRG: Bearing to destination, PWR: Power source voltage, L/L: position in latitude and longitude)

6.Press the [ENT] key.

7.Select the items LEFT and RIGHT and set their options like you did for LARGE, referring to Figure 3-12 for location of indications.

Figure 3-10 Options for LEFT, RIGHT

8.Press [DISP] key twice to display the navigation data.

The figure below shows display appearance for the setting shown in Figure 3-8.

Figure 3-11 Nav data display

3-5