Safety Instructions for the Installer
WARNING
Do not open the cover unless totally familiar with electrical circuits and service manual.
Improper handling can result in electrical shock.
Turn off the power at the ship's mains switchboard before beginning the installation. Post a warning sign near the switchboard to ensure that the power will not be applied while the equipment is being installed.
Serious injury or death can result if the power is not turned off, or is applied while the equipment is being installed.
CAUTION
Ground the equipment to prevent mutual interference.
Confirm that power supply voltage is compatible with the voltage rating of the equipment.
Connection to the wrong power supply can cause fire or equipment damage. The voltage rating appears on the label at the rear of the equipment.
Observe the following compass safe distances to prevent interference to a magnetic compass:
| Standard | Steering |
| compass | compass |
|
|
|
0.5 m | 0.3 m | |
|
|
|
iii