Furuno 1933C, 1943C, 1833C manual When an alarm setting is violated, Sounder alarm menu

Page 168

4. VIDEO SOUNDER OPERATION

4.12.6When an alarm setting is violated...

When an alarm setting has been violated the buzzer sounds and the speaker icon appears in red. Press the [CLEAR] key to silence the alarm. At this time the color of the speaker icon changes from red to background color. You can see which alarm has been violated on the alarm menu display. In the example below the bottom alarm has been violated.

To see which alarm(s) has been violated:

1.Press the [ALARM] key. The name of the offending alarm is shown in the ALARM INFORMATION window.

Alarm information window

AUDIO ALARM

INTERNAL BUZZ

BOTTOM ALARM

0050.0-0100.0ft

TEMPERATURE ALARM

OFF

FISH ALARM

OFF

FISH ALARM (B/L)

OFF

 

 

ALARM INFORMATION

DEPTH ALARM!

SOUNDER

ALARM

EDIT

CLEAR

ALARM

RETURN

Speaker icon

Sounder alarm menu

2.Press the CLEAR ALARM soft key to acknowledge the alarm (and silence the buzzer if it has not already been done with the [CLEAR] key). The color of the speaker icon changes from red to background color. The icon remains on the screen until the reason for the alarm is eliminated or the alarm is disabled. If more than one alarm has been violated, the message CONTINUE appears at the bottom of the alarm information window. In this case, press the NEXT INFO soft key to see which other alarms have been violated.

Note: The alarm icon is red when an alarm setting is violated, and changes to background color when the [CLEAR] key or CLEAR ALARM soft key is pressed. The color remains the same regardless of how many times another alarm is violated.

3. Press the [ALARM] key to close the menu.

4-24

Image 168
Contents Page R 0 0 Safety Instructions Table of Contents Iii Plotter Operation Video Sounder Operation Customizing Your Unit Vii Data TransferForeword ViiiFeatures Model Output Range RadarSingle-unit NavNet system Model 1833C/1933C/1943C Single-unit NavNet system Model 1833C/1933C/1943CSingle-unit NavNet system GD-1900C Single-unit NavNet system GD-1900CXii Two-unit NavNet systemTwo-unit NavNet system Three-or-more-unit NavNet systemOperational Overview Operating Controls Display unit controlsOverview of display unit controls Control panelSoft keys Display unit12/LP 3nm Radar and plotter displaysRemote controller Remote controllerInserting a Chart Card Chart card and card removerTurning the Unit On/Off Startup sequenceBrilliance adjustment soft keys Display Brilliance, Panel Brilliance, HueDisplay brilliance, panel brilliance Display brilliance and panel brilliance windows2 Hue Hue windowSelecting a Display Display modesDisplay screens Screen type and available display screenSelecting a display Display screen selection windowRadar combination screen selection window Switching control in combination and overlay screens To adjust plotterSelecting image source Select source menuRadar source and sounder source windows Trackball, Cursor Cursor, cursor dataEntering the MOB Mark, Setting MOB as Destination MOB conceptMOB mark messages Data Boxes Showing, hiding data boxes with soft keyData boxes Rearranging data boxes Temporarily erasing a data boxFunction Keys Executing a function16.0 nm Function keysSimulation setup menu Simulation DisplayRadar NavNet display unit-generated echoesPlotter Sounder Radar Display + 359.9 ˚R12/ LP Radar displayTuning Adjusting the GainTuning window Transmitting, Stand-byGain adjustment soft keys Gain sensitivity windowAdjusting the A/C SEA SEA setting windowReducing Sea Clutter How the A/C SEA worksAdjusting the A/C Rain Rain setting windowReducing Precipitation Clutter Range Scale Range scales nm, smRange scales km Signal process soft keys PulselengthPresentation Mode Selecting a presentation modeRadar display soft keys Head-up presentation mode Course-up presentation modeDescription of presentation modes Head-up HUNorth-up presentation mode True motion presentation modeNorth-up NU True motion TMMeasuring the Range Measuring range by range ringsRadar display soft keys How to measure range to a target with the cursor Measuring range by cursorMeasuring range by VRM EBL/VRM soft keysMeasuring the Bearing How to measure bearing with the EBL Erasing an EBL, EBL indicationErasing EBL/VRM data boxes Hiding EBL/VRM data boxesErasing the Heading Line, North Marker Reducing Noise InterferenceRejecting Radar Interference Radar interferenceZoom Zooming in on radar targetsZooming in on ARP, TTM targets ZoomShifting the Picture Manual shiftTarget no. selection window Shifting the picture manuallySetting automatic shift maximum speed Auto ship speed setting windowAutomatic shift Automatic shiftUsing the Offset EBL Predicting collision coursePredicting collision course with the offset EBL Measuring range & bearing between two targets Measuring range and bearing between two targetsEcho Trails Trail timeSample echo trails Trail soft keysStarting echo trails Trail gradationMultitone and monotone trails Echo trail mode Trail mode windowTrail color Trail color windowEcho Stretch Types of echo stretchEcho Averaging Effect of echo averagingOutputting TLL Data Target soft keysGuard Alarm Setting a guard alarm zoneHow to set a guard alarm zone When the alarm is violated… Cancelling the guard alarmSetting watchman stand-by interval WatchmanHow watchman works Turning on/off watchmanSuppressing Second-trace Echoes Second-trace echoesWaypoint Marker Waypoint marker26 ARP, TTM Operation Display accuracy is affected by the followingARP setup menu Activating/deactivating ARP, TTMARP target info window ARP plot symbols Acquiring and tracking targets ARPManual acquisition Automatic acquisitionDisplaying target number ARP, TTM Automatic acquisition areaARP target number Cancel all targets window Terminating tracking of ARP targetsTerminating tracking of selected targets Terminating tracking of all targetsSetting vector attributes ARP What is a vector?Vector reference, vector time Displaying past position ARP Past position displaysHistory interval window 26.7 ARP, TTM target data ARP target data26.8 CPA/TCPA alarm ARP CPA windowLost target alarm ARP Canceling a lost targetTcpa window Lost target markInterpreting the Radar Display GeneralMinimum and maximum ranges Radar resolution Bearing resolutionRange resolution Bearing accuracyFalse echoes Multiple echoesMultiple echoes Sidelobe echoesVirtual image Virtual imageShadow sectors Shadow sectorsAppearance of Sart signal on the radar display Sart Search and Rescue TransponderGeneral procedure for detecting Sart response General remarks on receiving SartAppearance of racon signal on the radar display Racon Radar BeaconSEA control Rain controlPlotter Displays Full-screen plotter displayFull-screen plotter display Contents of nav data window Nav data window001WPT Compass display Compass displayReading the XTE cross-track error monitor Setting the range for the XTE monitorXTE range setting window Soft keysHighway display Highway displayNav data display Nav data displaysPlotter display, north-up mode North-upPlotter display, auto course-up mode Course-upAuto course-up Plotter display, course-up mode, destination setChart Scale Charts scalesShifting the Display Chart Cards Chart card overviewChart icons and their meanings Indices and chart enlargement Sample chart Japan, showing indicesWhen a chart cannot be displayed Furuno and NavCharts charts Chart symbolsData for aids to navigation Port service icons NavCharts only Plotter display, showing port service displayMAP charts Cursor and data displayObjects window Example of caution area windowIcon data Lighthouse iconObject windows Sample lighthouse data Tide informationObjects window Tide window Date windowWorking with Track Displaying trackOwn ship track Track control menuStopping, restarting plotting of own ship track Target trackChanging track color Own ship’s trackOwn ship track color window Track plotting method and interval for own ship track Track plotting methodInterval window Track plotting intervalChanging own ship track/mark distribution setting Track memory windowErasing track Erasing own ship track by areaErase menu Erasing own ship track by color Erase track by color windowErasing all own ship track Erasing all target tracksMarks, Lines Entering a mark, lineChanging mark attributes Marks & lines menuSelecting line type Marks shape windowMarks§& lines menu Lines style windowErasing marks, lines Erasing an individual markErasing an individual line Erasing marks, lines by areaWaypoints Entering waypointsEntering a waypoint at own ship position Entering a waypoint with the cursorWaypoint mark shape selection window Waypoint mark color selection windowEntering a waypoint by range and bearing Editing waypoint data Entering a waypoint from the waypoint listAlphanumeric and local waypoint lists Editing waypoint data from the waypoint listEditing a waypoint from the plotter display Plotter displayErasing waypoints Erasing a waypoint directly from the plotter displayErasing a waypoint from the menu Erasing a waypoint from the waypoint listChanging waypoint mark size FURUNO, NavCharts Chart details menuSearching waypoints Alphanumeric listRoutes Creating routesEntering a route with existing waypoints Route menuNew route entry screen Entering a route with the cursorCreating voyage-based routes Save route menuSave route window Displays for entry of time, distance interval For manual entry of waypoints, do the followingTo stop recording waypoints and save the route Connecting routes Connect route windowInserting waypoints Inserting a waypoint from the route listEdit route menu Waypoint list for editing a route local listInserting a waypoint from the plotter display Inserting a waypoint in an intermediate location on a routeRemoving waypoints from a route Erasing routesRemoving a waypoint from the route list Removing a waypoint from the plotter displayNavigation Navigating to a quick pointSelecting quick point entry method Go to method windowNavigating to waypoints Navigating to multiple quick pointsSelecting a waypoint from the plotter display Selecting a waypoint from the waypoint listNavigating to ports, port services NavCharts only Port services and sample port listSample filling station locations southern Italy Following a route Selecting the route to followPlotter display, route selected as destination Navigating waypoints in reverse orderExample of when to restart navigation Restarting navigationLog display Setting speed for ETA calculation Switching waypointsAutomatic waypoint switching methods Select speed for ETA windowCanceling route navigation Alarms Audio alarm on/offPlotter alarm menu Audio alarm windowArrival alarm How the arrival alarm worksArrival alarm window Anchor watch alarm How the anchor watch alarm worksAnchor watch alarm window XTE Cross-Track Error alarm Speed alarmHow the XTE alarm works XTE alarm windowProximity alarm Proximity alarm windowProximity mark Trip alarm Trip alarm windowAlarm information Plotter alarm menu,Alarm messages Plotter alarm messages and their meaningsResetting Trip Distance General setup menu,Principle of Operation Underwater conditions and video sounder displayDisplay mode window Sounder DisplaysSelecting a sounder display 120 Description of sounder displaysSingle-frequency display Indications on the single frequency displayDual-frequency display Dual-frequency display KHz pictureSounding area and transmission frequency Marker-zoom displayMarker-zoom display plus normal sounder display Bottom-zoom displayBottom-zoom display plus normal sounder display Bottom-lock display Bottom-lock display plus normal sounder displayBottom discrimination display Bottom discrimination displayScope display display only Scope displayHow to use the Split soft key example dual frequency display Selecting screen split method in combination displaysHow to enable automatic sounder operation Automatic Sounder OperationHow the automatic sounder works Types of automatic sounder modesSelecting the manual mode Adjusting the gainManual Sounder Operation Selecting display rangeShifting the range Gain windowShift concept How to measure depth and time Measuring Depth, TimeReducing Interference Types of interferenceNoise limiter window Reducing Low Level Noise Appearance of clutterClutter window Signal level window Erasing Weak EchoesAppearance of weak echoes Color bar 16 color when white marker function is active White MarkerWhite marker window Picture Advance Speed Advancement independent of ship’s speedPicture advance window How the speed-dependent picture advance mode works Advancement synchronized with ship’s speedDisplay Colors Hue no. and background and echo colorsSounder alarm menu Alarm audio windowBottom alarm Fish alarmBottom alarm window Fish alarm windowFish alarm B/L Fish alarm B/L windowWater temperature alarm Water temperature alarm windowWhen an alarm setting is violated Sounder alarm menuWater Temperature Graph Sounder alarm messages and their meaningsInterpreting the Sounder Display Zero lineBottom echo Zero lineFish school echoes Surface noise/AerationFish school echoes Surface noise/aerationGeneral Setup General setup menuContents of general setup menu On nextRadar Setup Radar display setupContents of general setup menu con’t from previous Radar display setup menuContents of radar display setup menu Con’t on nextContents of radar display setup menu con’t from previous Radar range setup Radar range setup menuFunction key setup Radar function key menuRadar function key options Radar function keys Menu Item Function Function KeyPlotter Setup Plotter setup menu Contents of plotter setup menuNavigation options Function key setup Plotter function key menuPlotter function key options Plotter function keys RULChart Setup Chart offsetPlotter display, chart offset selected FURUNO, NavCharts chart attributes Chart details menu FURUNO, NavChartsContents of chart details menu FURUNO, NavCharts MAP chart attributes Contour line menu FURUNO, NavChartsChart details menu C-MAP Cntour Line soft keyContents of chart details menu C-MAP Settings description Depth Info soft keyDepth info menu C-MAP Data Boxes Setup Data box menuHot Page Setup Hot page setup menuHot page setup menu, Split X 3 screen, sub screen selection HOTNavigator Setup Contents of nav setup menuNavigation data source GPS receiver setup GPS setup menu Contents of GPS setup menuCon’t on next Contents of GPS setup menu con’t from previous Status TD display setup TD setup menuDisplaying Loran C TDs Loran GRI & station pair windowDisplaying Decca TDs Decca chain and station pair windowNav Data Display Setup Nav data setup screenNav data setup window Sounder Setup System setupOn next Sounder system setup menu description con’t from previous TVGSensor setup Sensor setup menuSensor setup menu settings Sounder range setup menu Default basic rangesSounding range, zoom range, bottom lock range Zoom range and bottom-lock rangesSounder function key menu Sounder function key optionsSounder function keys Memory Card Operations Formatting memory cardsSave data menu Saving data to a memory card Save data menuMemory card messages Memory card messagesPlaying back data from a memory card Load data menuSetting communication software on the PC Uploading, Downloading DataUploading or downloading data Upload and download menusBaud rate window Waypoint data formatWaypoint data format Characters available for commentRoute data menu Route comment data formatEnd of sentence Loading Waypoint Data from Yeoman Receiving Data Via Network Equipment Receive data menuHost name window Marks & lines windowOutputting Data Through the Network Select sentence menuPreventive Maintenance Replacement of BatteryMaintenance program Replacement of Fuse Trackball MaintenanceSimple Troubleshooting General troubleshootingRadar troubleshooting RadarPlotter troubleshooting PlotterSounder troubleshooting SounderDiagnostics Memory I/O testMemory I/O Test menu Display unit test Display unit test resultsGPS sensor test Requires GPS Receiver GP-310B GPS receiver test resultsNetwork sounder test Requires Network Sounder ETR-6/10N Network sounder test resultsARP test results Test pattern Test pattern sequenceKeyboard, remote controller test Screen for testing keyboard, remote controllerGPS Status Display GPS status displayClearing Memories Memory clear menuWindows for clearing memory Error Messages Error messagesMenu Overview Menu keyAppendix System Port Appendix Plotter Chart Details MAP Soft KEY 1, Track ON/OFF Soft KEY 2, Edit MK/LINE Temperature Graph ON, OFF SPD Sensing PIC ADV ON, OFF Alarm key Radar AlarmsPlotter Alarms Sounder AlarmsGeodetic Chart List World Time Chart Icons V ESpecifications of Marine Radar Model 1833C/1933C/1943CMODEL1943C Ggarmcrmagll Coating Color Specifications of Video Plotter GD-1900C IPX5 Index Index-1Index-2 IndexIndex-3 MessagesPresentation mode Index-4Index-5 Trackball
Related manuals
Manual 100 pages 8.64 Kb

1833C, 1933C, 1943C specifications

Furuno is a well-respected name in marine electronics, renowned for producing high-quality navigation and fish-finding equipment. Among their product line, the Furuno 1943C, 1953C, 1933C, GD-1900C, and 1833C stand out as reliable radar systems, providing exceptional performance and advanced features for both commercial and recreational vessels.

The Furuno 1943C is a powerful 12 kW radar system, boasting a 10.4-inch monochrome display with a user-friendly interface. It is equipped with digital signal processing (DSP) technology that enhances target detection and resolution. The 1943C offers superior target tracking capabilities, even in challenging weather conditions. Its patented Auto Gain Control ensures that small targets are not lost in clutter, making it a favorite among serious navigators.

Moving on to the Furuno 1953C, this model has an impressive 12 kW output and features a high-resolution 15-inch color display. It integrates advanced features such as Automatic Radar Plotting Aid (ARPA) for tracking multiple targets simultaneously, increasing situational awareness and safety on the water. Additionally, the 1953C offers a range of presentation modes, allowing users to customize the display to their specific needs.

The Furuno 1933C is a compact yet efficient radar solution with a 6 kW output and a 10.4-inch monochrome display. This system is highly regarded for its reliable performance and ease of use. Its user-friendly interface makes navigation simple, while features such as Target Analyzer and Echo Trails aid in identifying potential hazards, ensuring safe passage through busy waterways.

The Furuno GD-1900C combines chartplotting and radar in a single unit. With a 10.4-inch color display, it provides clear visuals of radar data as well as navigation charts. The GD-1900C supports various chart formats, including C-MAP and Navionics, allowing boaters to access detailed navigational information. This system is especially useful for those who need both radar and chartplotting capabilities in a space-saving design.

Lastly, the Furuno 1833C is a versatile radar system with a 4 kW output and a 7-inch color display, catering to smaller vessels. It features Furuno's advanced technology, such as a built-in GPS receiver and the ability to overlay radar data on electronic charts. This model is ideal for recreational boaters seeking an affordable yet feature-rich radar solution.

In summary, Furuno’s range of radar systems, including the 1943C, 1953C, 1933C, GD-1900C, and 1833C, demonstrates the brand’s commitment to quality and innovation in marine technology. Each unit incorporates advanced features tailored to meet the diverse needs of boaters, ensuring safe and efficient navigation on the water.