Pioneer DEH-P9100R Understanding auto-equalizing error messages, Display Cause Remedy

Page 74

Additional Information

Understanding auto-equalizing error messages

When correct measurement of car interior acoustic characteristics is not possible using the auto- equalizer, an error message may appear on the display. If an error message appears on the display, refer to the table below to see what the problem is and the suggested method of correcting the prob- lem. After checking, try again.

Display

Cause

Remedy

ERROR CHECK MIC

Microphone is not connected.

Plug the supplied microphone

 

 

securely into the jack.

 

 

 

ERROR CHECK SPEAKER

The microphone cannot pick

Confirm that the speakers are

 

up the measuring tone of the

connected correctly.

 

 

 

 

front and rear speakers.

Correct the input level setting of the

 

 

power amp connected to the

 

 

speakers.

 

 

 

 

 

Set the microphone correctly.

 

 

 

ERROR CHECK SYSTEM

The surrounding noise level

Stop your car in a place that is as

 

is too high.

quite as possible, and switch off the

 

 

engine, air conditioner or heater.

 

 

 

 

 

Set the microphone correctly.

 

 

 

73

Page 73 Page 75
Image 74
Page 73 Page 75
Contents DEH-P90HDD Contents Selecting services from the preset Using compression and dynamic bassSetting the announcement support Selecting services from the availableUnderstanding auto-equalizing error Selecting channels from the presetUsing sound field control, octaver Understanding built-in CD player errorWe Want You Listening For a Lifetime Key Finder Steering remote controllerVolume Head unitFeatures About this manual PrecautionAbout this product Products with voice control functionsPioneer Electronics of Canada, Inc After-sales service for Pioneer productsAbout the XM Ready mark Customer Satisfaction DepartmentFeature demo Resetting the microprocessorReverse mode About the demo modesReplacing the lithium battery Remote controller and careInstalling the lithium battery Remove the lithium battery PrecautionFunction button operation Using the steering remote con- trollerPress Audio to select the desired mode Audio button operationSetting the date Displaying and setting the clockSetting the time display on or off Setting the timeReplacing the front panel Detaching and replacing the front panelTheft protection Detaching the front panelTurning a source on or off Press Volume to extend the Volume outwardBasic Operation Soft KEY operationBand button Switching the function of the multi-func- tion buttonsExample of multi-function button opera- tion Back buttonKey guidance indicator Display example e.g., built-in CD playerBasic operation Display and indicatorsTuner Storing and recalling broadcast stationsStoring the strongest broadcast stations Tuning in strong signalsTuner function menu Selecting stations from the prePress Open and then press CD Eject to eject the CD Built-in CD PlayerCD Eject button Built-in CD player function menu Switching and scrolling the titleRepeating play Button OperationSelecting tracks from the track title list Playing tracks in random orderScanning tracks of a CD Press Next until the desired track title appearsPause lets you temporarily stop playback of the CD Pausing CD playbackEntering disc titles MP3 Play Press Open and then press CD Eject to eject the CD-ROMMP3 function menu OverleafRefer to Repeating play on Scanning folders and tracksSelect the repeat range Pausing MP3 playback Pause lets you temporarily stop playback of the MP3During record standby Music Server RecordingBefore recording During recordingDigital and analog recording Press Band to cancel the record standby status OverleafRecording from the built-in CD Bit rateRecording function menu Switching CD informationRecording from a source other than the built-in CD Recording range Disc and ContinueBuilt-in CD recording Selecting the recording rangeSelecting the recording quality Multi-CD RecordingMusic Server Play Selecting the playlist modePress Band to select the desired playlist mode Press Source to select the music serv- erDeleting a track from a custom playlist file Using the custom playlist modePlaylist files Press Next to display CSTM1 CSTM6+TTL Gracenote CddbDisplays playlist file title Track titleMusic server function menu has the follow- ing functions Music server function menuScanning files and tracks Refer to Repeating play on thisSelecting files from the playlist file title list Pausing music server playbackPress Func and then press Pause to select the pause mode Press Next to display the desired playlist file titleEntering track titles Entering titlesEntering playlist file titles Entering track artist namesErasing a track from playlist file When selecting All When selecting other than AllDeleting tracks and track infor- mation Erasing a playlist file from playlist mode Press Open to open the front panel MS loading slot Access lampMemory Stick Player Memory Stick player function menu Scrolls the displayed titlePausing Memory Stick play- back Scanning tracks of a Memory StickConfirmation screen appears Erasing tracks from the Memory StickErasing all tracks from the Memory Stick Selecting a disc directly Multi-CD PlayerDisc multi-CD player Press Source to select the multi-CD playerMulti-CD player function menu Multi-CD player function menu has the fol- lowing functionsScanning CDs and tracks Selecting discs from the disc title list Press ABC to switch the character modePress 5 or ∞ to select letters, numbers and symbols Press 5 or ∞ to play a disc you want to enter the titleProgramming tracks in ITS memory Using compression and dynamic bass emphasisUsing ITS memory Erasing a CD from ITS memory Playback from ITS memoryErasing a track from ITS memory Press ITS.P to turn ITS play onIndicator Status Indications that light when function is switched onIndicator Function DAB TunerStoring services Storing and recalling servicesSwitching the display Recalling servicesDisplaying dynamic labels Dynamic label functionDAB tuner function menu Storing a dynamic labelSelecting services from the avail- able service list Setting the announcement sup- port interruptionSelecting services from the pre- set service list Searching the available PTYQBand WPreset number eChannel TV TunerSelecting channels from the pre- set channel list ChLIST preset channel listTV tuner function menu Bssm best stations sequential memoryAdjusting the audio finely Audio AdjustmentsAdjusting the audio easily Extra functionsPress 2 or 3 to adjust left/right speaker balance Using balance adjustmentUsing loudness Audio menuSwitching the octaver setting Adjusting equalizer curvesAdjusting 13-band graphic equal- izer Adjusting BBE sound levelRecall the equalizer curve you want to adjust Using automatic sound levelizerUsing position selector Press 5 or ∞ to adjust the level of the equalizer bandAdjusting time alignment Using time alignmentUsing subwoofer output Button Type of carSetting the high pass filter for front speakers Using the high pass filterAdjusting subwoofer settings Setting the high pass filter for rear speakersSwitching the digital attenuator Adjusting source levelsUsing the auto-equalizer Creating the auto-equalizer curveBefore operating the auto-equalization function Carrying out auto-equalizingTurn the ignition switch to on or ACC Press any button to cancel the auto- equalizer modeUsing reverse mode Initial SettingsInitial settings menu Using the feature demoPress MUTE.S to select the desired set- ting Formatting the Memory StickWith the source turned off, press Hold Close the front panelSetting the warning tone Other Functions Setting the background still picture Setting the ASL displaySetting the background visual You can display the ASL effect level. Refer toSelecting AUX as the source Using the AUX sourceUsing the telephone muting/ attenuation Entering the AUX titleCD-R and CD-RW discs Additional InformationCD player and care MP3 files About folders and MP3 filesMemory Stick player and care Error Check Speaker Understanding auto-equalizing error messagesError Check MIC Error Check SystemError Understanding built-in CD player error messagesSwitch back to the CD player HeatServer ERROR- 30, A0 Understanding music server error messagesServer Error TempUnderstanding music server error messages when recording Stick Write Error Understanding Memory Stick player error messagesStick Error Format ErrorStick Read Error Terms Packet write Memory StickMulti-session Audio/DSP SpecificationsGeneral CD playerFM tuner AM tunerMeguro 1-CHOME, MEGURO-KU, Tokyo 153-8654, Japan KMMUF/01K00001Installation Manual CRD3473-A UC KMMUF/01K00000English Installation Installation with the rubber bush FigDIN Rear-mount English Installing the Steering Remote Control Unit Page Page

DEH-P9100R specifications

The Pioneer DEH-P9100R is a high-performance car stereo that exemplifies the brand's commitment to delivering superior audio and innovative features. Launched as part of Pioneer’s esteemed series of car audio systems, the DEH-P9100R stands out due to its advanced functionalities, quality sound reproduction, and user-friendly design.

One of the defining characteristics of the DEH-P9100R is its high-quality audio output. It incorporates a 24-bit digital-to-analog converter, which offers precise audio processing for a clearer and more dynamic sound. This feature ensures that even the subtlest of details in music are reproduced, providing an immersive listening experience.

The DEH-P9100R supports a wide range of audio formats, including MP3, WMA, and WAV, catering to diverse listening preferences. With its built-in CD player and compatibility with various external devices, such as USB drives and iPods, users can enjoy their favorite tracks with ease. The unit also features a 3-way programmable crossover, allowing for optimal sound tuning based on individual preferences and vehicle acoustics.

Moreover, the DEH-P9100R employs Advanced Sound Retriever technology. This innovative feature enhances the playback quality of compressed audio formats, restoring the depth and richness that often gets lost during compression. Users can enjoy their digital music libraries without compromising sound quality.

Another significant aspect of this car stereo is its connectivity options. The DEH-P9100R is equipped with a built-in Bluetooth module, enabling seamless hands-free calling and audio streaming from compatible devices. This feature enhances driving safety while allowing users to enjoy their music collection effortlessly.

The intuitive interface of the DEH-P9100R includes an easy-to-read LCD display and a user-friendly layout. It provides quick access to essential functions like bass, treble, balance, and fade adjustments, catering to audiophiles who want personalized audio tuning.

For those who enjoy visual entertainment, the DEH-P9100R also supports video playback, making it an attractive option for those who want to enhance their driving experience.

Overall, the Pioneer DEH-P9100R is a blend of cutting-edge technology and sophisticated design. Its superior audio features, robust connectivity, and customizable settings make it a standout choice for car audio enthusiasts looking to elevate their in-car listening experience.
Top Page Image Contents