CONNECTION TO 12V BATTERY
USING BATTERY CLIPS
1.Insert the Inverter’s Cigarette Lighter Plug into the socket on the Battery Clip Connection Cable.
2.Connect the Red (+) Battery Clip to 12V battery’s red (+) terminal. Connect the Black
3.Turn Inverter “ON”. If the LED Status Light on Inverter illuminates GREEN, the unit is functioning properly. If the LED Status Light
n the Inverter illuminates RED, turn unit off immediately and check all connections.
4.Plug 220V appliance into one of the Inverter’s 220V AC Electrical Sockets. Switch appliance ON to begin operation. As long as Inverter’s LED Status Light remains GREEN, the device may be
operated as normal.
Note: Make sure Inverter is not ON when starting vehicle. If ON, a voltage surge from the vehicle could damage the Inverter or device plugged into it.
BATTERY