Philips SRC2063WM/17 manual Resetting a button to its original function, Seconds, until, Lights up

3.2Resetting a button to its original function

If an improved button (see chapter 2.2.2) still does not function as expected, you can always reset the button to its original function.

English

1	In the current
	device mode, keep 5 sec.
	digit buttons
	and	pressed
	simultaneously for 5
	seconds, until the
	red Setup light		lights up.
2	• The remote control is now in setup mode.
	Press digit buttons
	,	, and	, in
	that order.
	•	After each
		button press
		the red Setup
3		light blinks once.
	Press the button
	that you wish to
	reset twice. E.g. the
	22 button.		2 x
	•	After each

button press the red Setup light blinks once.

•The red Setup light will blink one more time to confirm that the button was succesfully reset to its original function.

Using the universal remote control

EN 11

P2063WM_17__Manual 11 25-11-09 13:1