Important
If you made a mistake:
•Press the device selection button twice to exit setup.The red Setup light turns off.
•Restart from the beginning.
English
•If the device does not respond at all or not to all of the button commands or if you cannot find the code for your brand, enter ‘9, 9, 9, 9’ in step 3 and continue with step 4.The remote control will now search its full database for a code that works with your TV. Full database search may take up to 15 minutes.
2.2.1Setting up the remote controls for
other devices (DVD player / recorder, DTV, Cable / Satellite box, DVR and VCR)
1 Make sure the device is turned on, fully operational and able to respond to remote control commands. E.g. insert a disc in the DVD player / recorder or a video cassette in the VCR (SRP2006WM only).
2 Then follow steps 2 to 6 of ‘Setting up the universal remote controls to operate your TV’. Make sure to use the correct device selection button:
for SRP2003WM: or .
for SRP2006WM: , , , or .
2.2.2Improving buttons
When correctly set up, the remote control should be able to operate all your devices. However, when using the remote control for the first time it might occur that some buttons do not yet function as expected.
In this case you can have the remote control search for alternatives.
Note
Improving buttons is not possible when the code was found during full database search (with code ‘9, 9, 9, 9’).
Getting started
EN 7
P2063WM_17__Manual 7 |