Philips SRC2063WM/17 manual Entered. In this case, try again, Aim the remote

3Look up the 4-digit

code for your brand in the brand list at the back of this user manual.

A 4-digit code is shown for each brand. Use the digit buttons to enter the code for your brand (e.g. Philips,

	).
	• If the red Setup
	light turns off, an invalid code was
4	entered. In this case, try again.
	Aim the remote	5 - 60 sec.

control at the TV. Press and hold the button. Release it immediately as soon as the TV switches off.

•This step normally takes between 5 and 60 seconds. In extreme circumstances

5	this step can take up to 15 minutes.
	Switch ON the TV.
	Try out the buttons
	that you need for
	operating it.Try, for
	example, if the
	- CH + and digit
	buttons function properly.
•	If a button does not work as expected, press
	and hold that button. Release it immediately
	as soon as it works. For more information,
6	see chapter 2.2.2.
	Press the
	device selection
	button twice to
	finish setup.	2 x
	• When no
	button is
	pressed for 5 minutes or more, the
	remote control will exit setup mode,
	automatically saving all your settings.

6EN

P2063WM_17__Manual 6 25-11-09 13:1