Xantrex Technology SW 1000, SW 600, SW 2000 manual Operating Limits, Power Output, Input Voltage

Operation

Operating Limits

Power Output

The PROwatt SW Inverter will deliver the following power continuously, depending on input voltage and ambient temperature. The inverter will deliver more than 10% of its continuous power rating for approximately five minutes. The inverter must cool down for 15 minutes before it can resume operation above its continuous power rating.

		Output	Input	Tempera
Model	Powera	Currentb	Voltage	ture
PROwatt SW 600	540 W	4.5 A		Ambient
PROwatt SW 1000	900 W	7.5 A
			13 Vdc	25 °C
				(77 °F)
PROwatt SW 2000	1800 W	15 A

a.Applies to resistive loads such as incandescent lights. b.Applies to reactive loads such as motors.

Input Voltage

The input voltage limits are shown in the following table.

Operating
Condition	Voltage Range	Comment
Normal	10.5–15.5 V	n/a

Peak Performance	13–14.5 V	n/a
Low Voltage Alarm	Voltage is	The audible low battery
	11.0 V or less	alarm sounds.
Operating
Condition	Voltage Range	Comment
Low Voltage	Voltage is	The unit shuts down to
Shutdown	10.5 V or less.	protect the battery from
		being over-discharged.
High Voltage	Voltage is	The unit shuts down to
Shutdown	15.5 V or more.	protect itself from
		excessive input voltage.
		Note: Although the
		PROwatt SW Inverter
		incorporates over-
		voltage protection, it can
		still be damaged if input
		voltage exceeds 16 V.
Unit restarts after	11.5 V	The unit will not restart
low voltage		unless the battery
shutdown		voltage is acceptable for
		running the load.

975-0529-01-01 17