Xantrex Technology HW 1000 manual Operating in Shore Power Mode, Inverter Mode Settings

Page 41

Operating in Shore Power Mode

Operating in Shore Power Mode

The Freedom HW operates in shore power mode when an AC source (a generator or utility power) is present at the AC input terminals. When the AC source is within operating range, the Freedom HW unit bypasses inverter function and provides the same AC source power to the AC output terminals. AC power will automatically pass through the Freedom HW.

WARNING: Shock hazard

Switching the Power button to Standby does not interrupt the supply of shore power to the Freedom HW. Shore power supersedes inverter function. See “Transitioning from Inverter Mode to Shore Power” on page 4–8.

The Freedom HW also automatically charges the battery bank that is connected while in shore power mode. See “Battery Charging” on page 4–12.

The green Status LED lights up to indicate that the Freedom HW is using utility (or generator) power and the battery is full. A flashing green Status LED indicates that the unit is charging the battery.

Inverter Mode Settings

Inverter mode

When the Freedom HW’s Inverter mode setting is enabled (“In1”) and

setting is

the AC source is outside the operating range or is disconnected, the

Standby

transfer switch automatically switches to inverter function. This means

 

that the AC output terminals will provide power from the battery and any

 

appliance connected to the AC output terminals will operate.

Inverter mode

When the Freedom HW’s Inverter mode setting is disabled (“In0”) and

setting is Off

the AC source is outside the operating range or is disconnected, the

 

Freedom HWwill not switch to invert mode. This means that even if the

 

Power button is pressed to try and turn inverter function on, there will be

 

no power coming from the battery to the AC output terminals. Therefore,

 

any appliance connected to the AC output terminals will not operate.

 

 

 

 

 

 

Note: To configure see “To change the inverter mode

 

 

setting:” on page 3–5.

 

 

 

 

975-0467-01-01

4–3

Page 40 Page 42
Image 41
Page 40 Page 42
Contents Freedom HW Page Freedom HW 1000 Inverter/Charger Contact Information Date and RevisionPurpose About This GuideScope AudienceRelated Information Conventions UsedReference Important Safety InstructionsSafety Personal Precautions When Working With Batteries DC Connection Precaution Precautions for Using Rechargeable Appliances Page Contents Troubleshooting Specifications Contents Xiv Figures Xvi Tables Xviii Introduction Low battery voltage alarm and shutdown prevents your Quality PowerReliable Back-upIndependent Power System Page Features Freedom HW Inverter/Charger unit Materials ListDefault Setting Your Setting Default Settings for the Freedom HW SystemFeature Description Front PanelRear Panel Side PanelDisplay Panel Page Configuration To adjust the battery type setting Setting Battery Types on the Main UnitViewing Inverter/Charger Information Adjusting Feature SettingsTo change the charger’s charging current setting To cycle through the various feature settingsCur Def1Charging Current Guidelines To change the inverter mode settingTo adjust the under voltage shutdown setting To adjust the alarm settingTo return all feature settings to factory default settings Page Operation Freedom Display Panel OperationInverter Mode Settings Operating in Shore Power ModeChecking Battery Status Operating in Inverter ModeChecking Output Power Disabling the Inverter FunctionOperating Several Loads at Once Adjusting the Audible Alarm12.8 Status LED During Inverter Mode00.0 Transitioning from Inverter Mode to Shore Power Transitioning from Shore Power to Inverter ModeOperating Limits Power OutputInput Voltage Operating Condition Voltage Range CommentHigh Surge Loads Inverter LoadsOverload Conditions Trouble Loads Over-temperature Conditions1Three-stage Charging Process Battery ChargingFUL Batteries Routine MaintenanceHW Inverter/Charger during operation TroubleshootingGeneral Troubleshooting Guidelines General Troubleshooting Guidelines Television Reception Common ProblemsBuzz in Audio Equipment E01 Condition Mode ActionE08 To reset error codes E10 to E12 Problem Possible Cause Solution Troubleshooting ReferenceTroubleshooting Reference Resistive Loads Inverter ApplicationsLong Transfer Times High Surge When Powering Incandescent and CFL BulbsMotor Loads Page Specifications DC Input Electrical Specifications Inverter ModeAC Output OtherDC Output Electrical Specifications Charge ModeAC Input System Specifications Environmental SpecificationsPhysical Specifications Unit Dimensions and WeightInverter Overload Operation Regulatory ApprovalsInvert Power Derating vs. Ambient Temperature Table A-1Charging Voltage Charger Output Current vs. AC Input VoltagePage Warranty Warranty and Return InformationProduct DisclaimerReturn Procedure Return Material Authorization PolicyOut of Warranty Service Purchased From Purchase Date Information About Your SystemWA-6 Page Xantrex Technology Inc
Related manuals
Manual 52 pages 9.88 Kb

HW 1000 specifications

Xantrex Technology HW 1000 is a well-regarded power inverter designed to meet the needs of recreational vehicle (RV) enthusiasts, marine applications, and off-grid solar systems. With its robust design and advanced technology, the HW 1000 offers an optimal solution for transforming DC power into reliable AC power, making it an essential component for anyone who requires off-grid energy solutions.

One of the main features of the Xantrex HW 1000 is its ability to deliver a continuous output of 1000 watts with a peak surge capability of up to 2000 watts. This means it can handle high inrush currents needed by appliances like refrigerators and air conditioners, providing a reliable power supply, even during demanding operations. The inverter is equipped with a pure sine wave output, which is crucial for sensitive electronics, ensuring that devices operate smoothly without the risk of damage or interference.

The HW 1000 employs advanced technology to detect and eliminate any harmonic distortion, giving users clean and stable power for any application. The inverter features built-in safety mechanisms such as over-voltage, under-voltage, and thermal overload protection, which safeguard both the unit and the devices connected to it. This robust protection ensures longevity and reliable operation, even in challenging conditions.

Portability is another key characteristic of the Xantrex HW 1000. Compact and lightweight, it can be easily transported in an RV, boat, or even a truck bed. The inverter is designed for easy installation, with a user-friendly interface that includes LED indicators for battery status, output voltage, and fault alerts, allowing users to monitor performance easily.

The HW 1000 is versatile and can be used in various applications, making it ideal for both recreational and emergency situations. It can power tools for construction work in remote locations, support essential appliances during power outages, or even charge batteries in solar setups, showcasing its adaptability across different energy needs.

In summary, the Xantrex Technology HW 1000 is a powerful, efficient, and versatile power inverter packed with essential features that ensure reliable performance for a wide range of applications. Its lightweight design, safety features, and pure sine wave output make it a popular choice among outdoor enthusiasts, tradespeople, and anyone looking for a dependable power solution.
Top Page Image Contents