Xantrex Technology HW 1000 manual Inverter Applications, Resistive Loads

Page 62

Table 5-2Troubleshooting Reference

Problem

Possible Cause

Solution

 

 

 

Battery charging current is

Ambient (environment)

Do not be alarmed, the unit is performing

lower than the charging set

temperature is high.

normally. The charging current

point during bulk charge

 

automatically de-rates or shuts down at

mode.

 

high ambient temperature. The charger

 

 

resumes to normal when the unit’s

 

 

temperature cools down.

 

 

Improve ventilation. Make sure the unit’s

 

 

ventilation openings are not blocked.

 

 

 

Alarm does not sound when

Alarm is turned OFF.

Reactivate the alarm. See “To adjust the

an error is encountered.

 

alarm setting:” on page 3–6.

 

 

 

The problem is not described

N/A

Visit www.xantrex.com/support.asp and

in this table.

 

check the FAQs (Frequently Asked

 

 

Questions) for your product.

 

 

 

Inverter Applications

The Freedom HW performs differently depending on the AC loads connected to it. If you are having problems with any of your loads, read this section.

Resistive Loads

These are the loads that the inverter finds the simplest and most efficient to drive. Voltage and current are in phase (i.e. in step with one another). Resistive loads usually generate heat in order to accomplish their tasks.

Toasters, coffee pots, and incandescent lights are typical resistive loads. It is usually impractical to run larger resistive loads—such as electric stoves and water heaters—from an inverter due to their high current requirements. Even though the inverter can most likely accommodate the load, the size of battery bank required would be impractical if the load is to be run for long periods.

5–10

975-0467-01-01

Page 61 Page 63
Image 62
Page 61 Page 63
Contents Freedom HW Page Freedom HW 1000 Inverter/Charger Date and Revision Contact InformationScope About This GuidePurpose AudienceConventions Used Related InformationImportant Safety Instructions ReferenceSafety Personal Precautions When Working With Batteries DC Connection Precaution Precautions for Using Rechargeable Appliances Page Contents Troubleshooting Specifications Contents Xiv Figures Xvi Tables Xviii Introduction Reliable Quality PowerLow battery voltage alarm and shutdown prevents your Back-upIndependent Power System Page Features Materials List Freedom HW Inverter/Charger unitFeature Description Default Settings for the Freedom HW SystemDefault Setting Your Setting Front PanelSide Panel Rear PanelDisplay Panel Page Configuration Setting Battery Types on the Main Unit To adjust the battery type settingAdjusting Feature Settings Viewing Inverter/Charger InformationCur To cycle through the various feature settingsTo change the charger’s charging current setting DefTo change the inverter mode setting 1Charging Current GuidelinesTo adjust the alarm setting To adjust the under voltage shutdown settingTo return all feature settings to factory default settings Page Operation Display Panel Operation FreedomOperating in Shore Power Mode Inverter Mode SettingsChecking Output Power Operating in Inverter ModeChecking Battery Status Disabling the Inverter FunctionAdjusting the Audible Alarm Operating Several Loads at OnceStatus LED During Inverter Mode 12.800.0 Transitioning from Shore Power to Inverter Mode Transitioning from Inverter Mode to Shore PowerInput Voltage Power OutputOperating Limits Operating Condition Voltage Range CommentHigh Surge Loads Inverter LoadsOverload Conditions Over-temperature Conditions Trouble LoadsBattery Charging 1Three-stage Charging ProcessFUL Routine Maintenance BatteriesTroubleshooting HW Inverter/Charger during operationGeneral Troubleshooting Guidelines General Troubleshooting Guidelines Television Reception Common ProblemsBuzz in Audio Equipment Condition Mode Action E01E08 To reset error codes E10 to E12 Troubleshooting Reference Problem Possible Cause SolutionTroubleshooting Reference Inverter Applications Resistive LoadsLong Transfer Times High Surge When Powering Incandescent and CFL BulbsMotor Loads Page Specifications AC Output Electrical Specifications Inverter ModeDC Input OtherDC Output Electrical Specifications Charge ModeAC Input Physical Specifications Environmental SpecificationsSystem Specifications Unit Dimensions and WeightRegulatory Approvals Inverter Overload OperationInvert Power Derating vs. Ambient Temperature Charger Output Current vs. AC Input Voltage Table A-1Charging VoltagePage Warranty and Return Information WarrantyDisclaimer ProductReturn Material Authorization Policy Return ProcedureOut of Warranty Service Information About Your System Purchased From Purchase DateWA-6 Page Xantrex Technology Inc
Related manuals
Manual 52 pages 9.88 Kb

HW 1000 specifications

Xantrex Technology HW 1000 is a well-regarded power inverter designed to meet the needs of recreational vehicle (RV) enthusiasts, marine applications, and off-grid solar systems. With its robust design and advanced technology, the HW 1000 offers an optimal solution for transforming DC power into reliable AC power, making it an essential component for anyone who requires off-grid energy solutions.

One of the main features of the Xantrex HW 1000 is its ability to deliver a continuous output of 1000 watts with a peak surge capability of up to 2000 watts. This means it can handle high inrush currents needed by appliances like refrigerators and air conditioners, providing a reliable power supply, even during demanding operations. The inverter is equipped with a pure sine wave output, which is crucial for sensitive electronics, ensuring that devices operate smoothly without the risk of damage or interference.

The HW 1000 employs advanced technology to detect and eliminate any harmonic distortion, giving users clean and stable power for any application. The inverter features built-in safety mechanisms such as over-voltage, under-voltage, and thermal overload protection, which safeguard both the unit and the devices connected to it. This robust protection ensures longevity and reliable operation, even in challenging conditions.

Portability is another key characteristic of the Xantrex HW 1000. Compact and lightweight, it can be easily transported in an RV, boat, or even a truck bed. The inverter is designed for easy installation, with a user-friendly interface that includes LED indicators for battery status, output voltage, and fault alerts, allowing users to monitor performance easily.

The HW 1000 is versatile and can be used in various applications, making it ideal for both recreational and emergency situations. It can power tools for construction work in remote locations, support essential appliances during power outages, or even charge batteries in solar setups, showcasing its adaptability across different energy needs.

In summary, the Xantrex Technology HW 1000 is a powerful, efficient, and versatile power inverter packed with essential features that ensure reliable performance for a wide range of applications. Its lightweight design, safety features, and pure sine wave output make it a popular choice among outdoor enthusiasts, tradespeople, and anyone looking for a dependable power solution.
Top Page Image Contents