Section 8 • Required Inspection, Service, &
|
| Maintenance |
Quick Reference Checklist (cont’d) | ||
3. | Ignition | Once the motor is cooled down, turn the ignition keys |
|
| counter clockwise to stop the engine. |
4. | Engine Operation | Check idle and shift. Listen for abnormal noises |
E. Securing the Boat |
| |
General |
| |
Lines and Fenders | Fenders in place, lines tied securely to dock | |
Boat Systems |
| |
1. | Helm Switch Panel | All switches in the OFF position |
2. | Gearshift & Throttle Controls | In the NEUTRAL and IDLE positions |
Engine |
|
|
1. | Ignition | Switch is in the OFF position and ignition keys are |
|
| removed |
2. | Battery Switches | In the OFF position |
3. | Fuel Valves (Diesel Only) | Closed (handle perpendicular to hose) |
F. If the Engine Does Not Start
No Starter Motor Response
1.Check battery switch is in the ON position.
2.Check the main circuit breaker.
3.Check gearshift/throttle control levers in the NEUTRAL positions.
4.Check battery condition for sufficient charge.
5.Check battery cable connections tight and free from corrosion.
6.Check starter motor and solenoid connections.
7.Check ignition switch connections.
8.Consult the engine manual that is located in the owners packet.
Starter Motor Responds, but No Ignition
1.Check that fuel tank is not empty.
2.Check that ignition shutdown switch lanyard is installed.
3.Check electrical connections on engine wiring harness and ignition wiring.
4.Check fuel filters and filter/water separators clean
5.Consult the engine maual that is located in the owners packet.
405 Performance® | 8.11 |