342Performance Owner’s Manual • Table of Contents
2. | Engines and Stern Drive | 4.2 |
| A. Maintenance and Service | 4.2 |
| B. Vibration and Causes | 4.2 |
| C. Impact to Stern Drive | 4.3 |
| D. Propeller Removal and Installation | 4.3 |
Section 5 • Fuel System |
| |
1. | Fuel System | 5.1 |
2. | Fueling Precautions | 5.2 |
| A. Static Electricity and the Fuel System | 5.2 |
| B. General | 5.2 |
| C. Before and During Fueling – Checklist | 5.2 |
| D. After Fueling – Checklist | 5.3 |
Section 6 • Electrical Systems |
| |
1. | Electrical Systems | 6.1 |
| A. Batteries | 6.1 |
| B. Ignition Protection | 6.1 |
| C. Breakers and/or Fuses | 6.2 |
| D. Fuse Panel | 6.2 |
2. | Electrolytic Corrosion & Zinc Anodes | 6.2 |
3. | Marine Electronic Cathodic | |
| (Mercathode®) | 6.3 |
4. | Electrical Systems | 6.3 |
Section 7 • Options & Accessories |
| |
1. | Options & Accessories Locations | 7.1 |
2. | Automatic Fire Extinguisher System (Option) | 7.2 |
3. | Fire Extinguisher Port | 7.2 |
| A. Canvas Care and Maintenance | 7.3 |
| B. Trailering With Canvas | 7.3 |
5. | Horn | 7.3 |
6. | Swim Platform w/ Ladder (Optional) | 7.3 |
7. | Depth Finder (Optional) | 7.3 |
8. | Stereo System | 7.4 |
9. | Head Systems | 7.4 |
| A. Requirements for Operators | 7.4 |
| B. Portable Head with | 7.4 |
| C. VacuFlush® Head (Option) | 7.5 |
| D. Holding Tank Operation | 7.5 |
E. Vent Filter | 7.5 |
10. Exhaust Systems | 7.5 |
Section 8 • Required Inspection, Service, & Maintenance
1. | Summary Guide for Inspection, Service and |
|
| Maintenance | 8.1 |
2. | Useful Service Information | 8.3 |
3. | Inspection, Service and Maintenance Protocol.... | 8.4 |
| A. Bilge Area | 8.4 |
| B. Topside and Supplies | 8.5 |
4. | Winterization Checklist for Boats Stored on Land8.5 | |
| A. Boat Storage | 8.5 |
| B. Engine | 8.5 |
| C. Battery(ies) | 8.5 |
| D. Fuel Systems | 8.6 |
5. | Fitting Out After Storage | 8.6 |
| A. Fuel System | 8.6 |
| B. Battery(ies) | 8.6 |
| C. Miscellaneous | 8.6 |
6. | Security Considerations | 8.7 |
7. | Power Steering System Maintenance | 8.7 |
8. | Quick Reference Checklist | 8.8 |
| A. Boarding the Boat | 8.8 |
| B. Preparing to Depart and After Launching | 8.9 |
| C. Departing | 8.10 |
| D. Returning to Port | 8.10 |
| E. Securing the Boat | 8.11 |
| F. If the Engine Does Not Start | 8.11 |
9. | After Market Equipment Checklist | 8.12 |
10. Maintenance Log | 8.13 | |
Section 9 • Care & Refinishing |
| |
1. | Paint Cleaning Agents & Other Substances | 9.1 |
2. | Fiberglass & Gelcoat | 9.1 |
3. | Stains & Scratches | 9.1 |
4. | Permanently Moored or Docked Boats | 9.2 |
5. | Topside Areas | 9.2 |
| A. Stainless Steel and Alloy Fittings | 9.2 |
| B. Salt Crystals | 9.2 |
6. | Acrylic Plastic Sheeting (Plastic Glass) | 9.2 |
7. | Canvas and Clear Vinyl | 9.2 |
8. | Exterior Upholstery Fabric | 9.3 |
9. | Interior Upholstery Fabric | 9.3 |
Index
342 Performance® | vii |