Section 8 • Required Inspection, Service, &
Maintenance
Summary Guide For Inspection, Service and Maintenance
|
|
|
| interval |
| ||
|
|
|
|
|
|
|
|
item | required | reference | before | after | every | every 50* | every 6 |
maintenance/service | source | every use | first 20 | 25* or 50 | or 100 | mos. or | |
| hours | hours | hours | annually | |||
Propeller | Inspect for damage |
|
| Always after striking object |
| ||
Seaworthiness |
|
|
|
|
|
|
|
Bilge drain plug | Installed and tight | Owner’s Manual p. 4.1 | • |
|
|
|
|
Hull damage | Check for loose, damaged or |
|
| Always after striking object |
| ||
Stern drive | missing parts |
|
|
| |||
|
|
|
|
|
| ||
Stern Drive |
|
|
|
|
|
|
|
Fluid level | Check level | Engine Manual | • |
|
|
|
|
Fluid | Replace | Engine Manual |
|
|
|
| • |
Topside & Supplies | Check for loose, damaged or | Owner’s Manual p. 8.5 |
|
|
|
| • |
missing parts |
|
|
|
| |||
|
|
|
|
|
|
| |
Trim Tabs |
|
|
|
|
|
|
|
Fluid
Check and add as needed
Trim Tab Manual
•
Zincs (Also see Mercathode System**)
Stern drive | Check and replace as needed | Owner’s Manual p. 6.3 | Every 25 hours of operation |
Trim Tabs | Check fluid level | Trim Tab Manual | Every 25 Hours of operation |
*Use in salt water or other severe operating conditions requires shorter maintenance/service intervals **May not be on your boat
8.2 | 202 Islander® |