Cisco Systems 6100 installation manual DS3 Subtending Card Connector

Page 5

78-5481-02 09/15/98

Installation - Subtended Network 8

Connect the DS3 subtending I/O card to connector J48, a 96-pin DIN connector, on the subtending host 6100 MC backplane. Refer to the Figure 8-3 for the location of these connectors.

Figure 8-3 DS3 Subtending Card Connector

System I/O	DS3 sudtending
card	card

16831

Cisco 6100 Set Up and Installation Manual

8-5

Image 5

Contents Cabling Conﬁguration Subtending Installation Subtended NetworkCable Type Subtending Cable Diagram SubtendingInstalling the 6100s Installation Procedures SubtendingDS3 Subtend Card Connecting the DS3 Subtending CardDS3 Subtending Card Connector DS3 Subtend Card Standoffs Cabling the System I/O Card to the DS3 Subtend Card Installing the DS3 Subtend ModuleThick Coaxial Cable through Ferrite Bead Completing the Installation Adding Standoffs for a DS3 Card Adding a DS3 Subtend Card78-5481-02 09/15/98 Installation Subtended Network

Related manuals

Manual 26 pages 40.44 Kb