Cisco Systems 6100 installation manual Installation Subtended Network

Page 1

C H A P T E R 8

Installation - Subtended Network

This section discusses installation procedures for adding subtended 6100s to a subtending host 6100. In this manual, the term “subtending” refers to the host 6100 node, and “subtended” refers to the downstream 6100 node in a subtended network.

All 6100s in a subtended network are installed in either a Digital Off-Hook (DOH) or a direct connect configuration first. Then if the network is to be subtended, the procedures in this section apply.

8.1 Cabling Configuration - Subtending

This section provides an illustration showing the cabling requirements for a subtended 6100.

Cisco 6100 Set Up and Installation Manual

8-1

Page 1 Page 2
Image 1
Page 1 Page 2
Contents Cabling Configuration Subtending Installation Subtended NetworkCable Type Subtending Cable Diagram SubtendingInstalling the 6100s Installation Procedures SubtendingDS3 Subtend Card Connecting the DS3 Subtending CardDS3 Subtending Card Connector DS3 Subtend Card Standoffs Cabling the System I/O Card to the DS3 Subtend Card Installing the DS3 Subtend ModuleThick Coaxial Cable through Ferrite Bead Completing the Installation Adding Standoffs for a DS3 Card Adding a DS3 Subtend Card78-5481-02 09/15/98 Installation Subtended Network
Related manuals
Manual 26 pages 40.44 Kb
Top Page Image Contents