Graco 238892, 238894, 238890 important safety instructions Symbols, Equipment Misuse Hazard

Page 3

Symbols

Warning Symbol

WARNING

Caution Symbol

CAUTION

This symbol alerts you to the possibility of serious injury or death if you do not follow the instructions.

This symbol alerts you to the possibility of damage to or destruction of equipment if you do not follow the instructions.

WARNING

INSTRUCTIONS

EQUIPMENT MISUSE HAZARD

Equipment misuse can cause the equipment to rupture or malfunction and result in serious injury.

DThis equipment is for professional use only.

DRead all instruction manuals, tags, and labels before operating the equipment.

DUse the equipment only for its intended purpose. If you are not sure, call your Graco distributor.

DDo not alter or modify this equipment. Use only genuine Graco parts and accessories.

DCheck equipment daily. Repair or replace worn or damaged parts immediately.

DDo not kink or over bend the hose or use the hose to pull equipment.

DDo not exceed the maximum working pressure of the lowest rated component in your system. Do not exceed 6000 psi (41 MPa, 414 bar) maximum fluid inlet pressure of the regulator or the maximum working pressure of the lowest-rated component in your system.

DUse fluids and solvents which are compatible with the equipment wetted parts. Refer to the Technical Data section of all equipment manuals. Read the fluid and solvent manufacturer’s warnings.

DAlways wear protective eyewear, gloves, clothing, and respirator as recommended by the fluid and solvent manufacturer.

DComply with all applicable local, state, and national fire, electrical, and safety regulations.

308647 3

Image 3
Contents Instructions-Parts List Important Safety InstructionsModel 238892 List of Models Table of ContentsEquipment Misuse Hazard SymbolsSkin Injection Hazard 308647 Installation Grounding the System Pressure Relief ProcedureAdjusting the System Pressure Cleaning the RegulatorOperation Flushing Problem Cause Solution TroubleshootingRelieve the pressure ServiceService Kits Installing the Air-Operated Conversion KitReplacing the Fluid Diaphragms Replacing the Cartridge With EZ Flush gauge port plug With fluid pressure gauge Parts DrawingDescription Qty Parts ListModels 238893, 238894, 248090, For Models 238894 238893 With EZ Flush gauge port plug ModelRegulator Housing Technical Data Performance Chart KeyTest Conditions Page Model 244734 air operated Dimensional DrawingsGraco Standard Warranty Graco InformationToll Free