Panasonic UB-8325 Electronic Pen Eraser, Scissors or shredder before disposing of it

Precautions

Replacing	• Dispose of the used thermal transfer film in a trash receptacle for burnable trash.
the Thermal	• A negative of the copied image will remain on the thermal transfer film. (To protect the
Transfer Film	security of your information, we recommend cutting up the used thermal transfer film with
	scissors or shredder before disposing of it.)
Electronic
Pen and
Electronic
Eraser

Transmitter

•Do not cover the transmitter with your hand while using an interactive function as this may cause the position of the Electronic Pen or the Electronic Eraser not to be normally detected.

NGOK

•Press down firmly with the point of the Electronic Pen or the eraser cloth of the Electronic Eraser on the screen film until you hear a buzzing sound, and then move it slowly. However, do not press down the point of the Electronic Pen too much strongly as this may make a dent in the screen back panel.

•Do not use two or more the Electronic Pens or the Electronic Eraser at the same time as this may cause the position of the Electronic Pen or the Electronic Eraser not to be normally detected.

•For precise positioning, keep the Electronic Pen and Electronic Eraser perpendicularly to the screen during use.

•Since ultrasonic is used to detect the position of the Electronic Pen and Electronic Eraser when they are being used, you may hear a buzzing sound, but this is not harmful to the human body or peripheral hardware. It will also not result in an electric shock.

12