Using the Panaboard in Projector Mode
Note
•When the Desktop Drawing Tool is closed, the drawings are erased.
• (Next) and (Previous) are only displayed when the PowerPoint Slide Show is running.
■Drawing or Erasing Lines
For the instructions, refer to “Step 2: Drawing and erasing lines on the Desktop” on page 38.
Note
•The width, color of the markers and the size of the eraser can be changed. (See page 41.)
•Handwritten lines drawn on the Desktop may be hidden or shifted when an application or a window is operated. If this occurs, click (Refresh) to display the Desktop.
■Refreshing Drawings on the Desktop
Drawings on the Desktop may be hidden or shifted when an application or a window is operated. If this occurs, refresh the Desktop.
1 Click | (Refresh) in the Desktop Drawing |
Tool. |
|
■Erasing All Drawings on the Desktop
1 Click | (All Clear) in the Desktop Drawing |
Tool. |
|
•A verification window appears. 2 Click [OK] to clear all.
■Changing Marker / Eraser Settings
It enables to change the width, color of the markers and the size of the eraser used in the Desktop Drawing Tool. These settings are effective until being changed.
1 | Click | (Setting) in the Desktop Drawing |
| Tool. |
|
| • The Marker / Eraser Setting window | |
2 | appears. |
|
Change the width or color of markers, or size |
of the eraser.
•Same Width:
Width of all color markers can be set to the same width of the black marker by checking the check box.
•Black / Red / Blue / Green:
Width (1 - 30 dots) or color of each marker can be set.
To change the width,
-Type the number of width.
-Click the right or left arrow of the scroll bar.
-Drag the scroll bar to the right or left.
To change the color,
Click the color of marker. Click the desired color from the Basic colors palette in the Color window.
Using
41