Making Copies
Making Copies
This section describes how to copy text and illustrations drawn on the screen.
1 | Set the power switch to on ( I ). |
• “ ” will light on the |
Indicator to indicate that the unit is ready to copy.
• The screen will move to home position and stop.
ON
OFF
2 | Press the |
| (Copy Key). |
| |||
| |||
• Text and illustrations on the screen will be |
copied and copies emerge from the output port.
• The output port can hold up to 10 sheets of copy paper. (Note that exceeding the output port’s capacity may result in paper jams.)
• For details on making multiple copies and so on, refer to “Copy Types and Procedures” on this page.
Note
•Do not use paper that has been copied on one side by this printer as copy paper in this unit or in any other copiers or printers as this may result in dirty rollers, degradation of printing quality, paper jams, and streaks and smudges on output paper.
•Copy quality increases with the thickness of the drawn line. To ensure quality copies, please use the markers (big).
•The markers for interactive (small) draw thin lines. The quality of the copies may be reduced when these markers are used.
•Do not write on the back side of the output paper from this unit. The printed ink may be transferred underneath the paper.
•Text or images in shades of yellow will not copy.
Copy Types and Procedures
[A]Copying the front of the screen
1)Press .
[B]Copying the back of the screen
1)Press to move the screen to be copied to the front.
2)Press .
[C]Making multiple copies (up to 9)
1)Select the number of copies (1 to 9) by
pressing as necessary.
2)Press .
•Press to stop copying in
[D]Making
Copying the front and back of the screen on a single sheet of paper
1) Press .
Using
21