Auxiliary Gearing 44 Series | Ingersoll-Rand 8274-( )A 8276-( )A

AUXILIARY GEARING - “44” SERIES

(36164 AND 36165)

DISASSEMBLY

a.Tap drive end of spindle with a soft face hammer to remove from housing.

b.Removebearing (36151) and spacer (36139).

c.Removeshafts (36137), releasing gears from spindle.

d.If it should becomenecessaryto removefront bearing (36151) and spacer (36138 or 36154-1);after removal of rear bearing (36151) and spacer (36139), alternately tap ends of shafts

(36137) to remove front bearing and spacers,

REASSEMBLY

a.Assemble spacers (36138 or 36154-1)and bearing (36151) to spindle.

b.Assemble gears to spindle and secure with shafts to align shafts to spacer.

c.Assemble spacer (36139) and bearing (36151) to rear of spindle.

d.Assemble with retaining ring (36152-1)into housing.

36138 SPACER	36137 SHAFT (2)
36152-1 RETAINING RING	36 I39 SPACER

36132 SPINDLE

3615 BEARING

FLAT SIDE OF SPACER

36151	BEARING	36164 GEARINGASS'Y
		36164 GEARINGASS'Y
S 33517 GREASE FITTING	36159 GEAR (2)

36154-1 SPACER

36152-1 RETAINING RING	7

36145 SPINDLE

-FLAT SIDE OF SPACER

36165 GEARING AS

38309 HOUSING

(4:l)

INCLUDES 335 GREASE FITTING

FIGURE3

-5-