GEARING | SECTION | M 40 |
|
| 46 |
GEARING | SECTION |
|
DRIVE GEARING - “44” SERIES
(36162 AND 36163)
DISASSEMBLY
a. Remove Key (44285) from Spindle. Tap drive end of Spindle with a
b.Remove Bearing (36151) and Spacer (36139).
c.Remove Shafts (36137) releasing Gears from Spindle.
d.If it should become necessary to remove Bearing (36149) and Spacer (36153 or 36136); after removal of Bearing (3615 1) and Spacer (36139) alternately tap ends of Shafts (36137) to remove Bearing and Spacer.
*150 - 160 FT. LB. SHEAR KEY
REASSEMBLY
a.Assemble Spacer(36 153 or 36 136) and Bearing (36 149) to Spindle.
b.Assemble Gears to Spindle and secure with Shafts (36137). Use a small screwdriver in slot of Shafts to align Shafts to Spacer.
c.Assemble Spacer (36139) and Bearing (36151).
d.Assemble with Washer (33563) into housing.
36136 SPACER | 36135 SPINDLE | 36137 SHAFT (2) |
|
33563 WASHER |
| 36139 SPACER |
|
|
|
| |
|
| 3615 | BEARING |
FLAT SIDE OF SPACER
36 I43 HOUSING | (10 INT. | TEETH |
|
|
|
| |
36149 BEARING |
| 36160 | GEAR (2) |
|
| (I9 | TEETH) |
*150 - 160 FT. LB. SHEAR KEY
36153 SPACER
36162 GEARING ASS’Y:
(4:l)
36144 SPINDLE
36151 BEARING
|
| FLAT SIDE OF SPACER |
|
| FLAT SIDE OF SPACER |
36 : 43 HOUSING | 36 I 59 | GEAR (2) |
| (24 | TEETH) |
36149 | BEARING |
|
36163 GEARING ASS’Y
(7:1)
FORM | FIGURE2 |