Sears 831 297241 owner manual Changing the Incline, LCD Display Operation, Turning OFF the Power

Page 9

Eachprogram is divided into eight equal time periods, called segments. The speed of the walking belt will change automatically at the beginning of each segment. A speed setting should now be programmed for each of the eight segments, using the eight programmable speed controls on the left side of the console. The control on the far left is for the first segment, and the control on the right is for the eighth segment. Move the controls up or down to program the desired speed settings. If the WALK mode was selected, refer to the scale above the WALK indica- tor to program speed settings; if the RUN mode was selected, refer to the scale above the RUN indicator. A sam- ple program is shown at the left. This program will begin with a slow speed setting. The speed will then increase during the second, third and fourth segments, and gradually decrease during the sixth, seventh and eighth seg- ments. An infinite variety of speed settings can be programmed.

Next, press the TIME SET buttons to set the length of time you want the program to last. Each time one of the but- tons is pressed, the length of time, shown in the TIME display, will change by 4 minutes. The buttons can be held down to set the length of time rapidly. The program can be set to last for a minimum of 4 minutes, up to a maxi- mum of 96 minutes.

To start the program, press the START button. The first segment indicator will begin to flash, and after a pause the walking belt will begin to move at the speed setting.of the first programmable speed control. The TIME display will show the time remaining in the program. After one-eighth of the length of time you set has elapsed, the second segment indicator will begin to flash, and the walking belt will change to the speed setting of the second program- mable speed control. The program will continue in this manner until the length of time you set has elapsed. The walking belt will then slow to a stop.

While the program is in progress, the speed of the walking belt can be changed during the current segment, if desired, by moving the programmable speed control located below the flashing segment indicator.The walking belt can be stopped while the program is in progress by pressing the MODE button or by removing the safety key from the console. The console will then be in the same condition as if the program had been completed. After the pro- gram is completed, the console can be switched to the manual mode by repeatedly pressingthe MODE button.

CHANGING THE INCLINE

To vary the intensity of your exercise, the inclineof the treadmill can be changed using the foot incline knob on the right foot rail. Before changing the incline, stop the walking belt. To increase the incline, stand with your left foot towards the back of the left foot rail. Using your right foot, press down the foot incline knob until the desired incline is reached. To decrease the incline, stand with your left foot towards the front of the left foot rail, and press down the foot incline knob until the desired incline is reached.

LCD DISPLAY OPERATION

I Incline

The four LCD displays provide continuous exercise feedback. The four displays are described below:

CALORIES--This display shows the approximate number of nutritional Calories that you have burned.

DISTANCE--This display shows the total distance that you have walked or run, up to 99.9 miles.

SPEED--This display shows the speed of the walking belt.

TIME--Whenthe console is in the manual mode, this display will show the total time that the walking belt has been moving. (If the treadmill is run for longer than 99 minutes and 59 seconds, the display will reset to zero and the treadmill will slow to a stop.) If desired, a time goal can be set. To set a time goal, you must first stop the walking belt. Next, press the TIME SET increase or decrease button. Each time one of the buttons is pressed, the time goal will change by 1 minute. The buttons can be held down to set a time goal rapidly. While the walking belt is moving, the display will count down the time goal. When no time remains, the walking belt will slow to a stop. When the console is in the WALK mode or the RUN mode, the TIME display will show the time remaining in the program.

Note: The CALORIES, DISTANCE and TIME displays can be reset by removing and re-inserting the safety key.

TURNING OFF THE POWER

To tum off the power, remove the safety key from the console. Store the safety key in a secure location.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents SEARS, Roebuck and CO., Hoffman ESTATES, IL 8MPH2.0HPSTEPINCLINEPROGRAMMABLESPEEDSEARS, Roebuck and CO., Dept WA Hoffman ESTATES, IL Full 90 DAY WarrantyTable of Contents IMP PRE Front BackRight S1£ Assembly Operation and Adjustment Plugging in the Power CordApplying Silicone Lubricant Turning on the Power Diagram of the ConsoleManualspeedcontrol Program Speed ControlTurning OFF the Power Changing the InclineLCD Display Operation Symptom the Power does not Turn on TROUBLE-SHOOTING and StorageSymptom the Power Turns OFF During USE Symptom the Walking Belt Slows When Walked onStorage Exercise Intensity Unconditioned ConditionedTraining Zone AGE BEATS/MIN Workout Guideunes TOE Touc H Stretch Suggested StretchesCALF/ACHILLES Stretch Quadriceps StretchNSP Part LIST--Model No R1094AExploded DRAWING---Model No Ordering Replacement Parts

831 297241 specifications

The Sears 831 297241 is a versatile and popular piece of fitness equipment designed for home use. This machine is known for its compact design, making it suitable for a variety of living spaces, whether a small apartment or a large home gym. Its robust construction offers durability and stability, essential for a safe workout experience.

One of the main features of the Sears 831 297241 is its dual-functionality, allowing users to perform both strength training and cardiovascular exercises. This is made possible through a combination of resistance bands and a user-friendly pulley system. The incorporation of resistance bands provides variable resistance levels, making it suitable for beginners as well as advanced fitness enthusiasts looking to challenge themselves.

The machine is equipped with an adjustable seat and backrest, allowing users to find their optimal workout position. This adaptability ensures comfort during exercise, reducing the risk of injury and enhancing performance. Furthermore, the Sears 831 297241 is designed with a sturdy base to accommodate various workout routines without wobbling or movement, ensuring that users can focus on their exercises.

The technology behind the Sears 831 297241 includes easy-to-use adjustable settings, allowing users to modify resistance levels quickly during workouts. This feature enhances the machine’s efficiency and enables users to target different muscle groups effectively. Additionally, the unit often includes built-in workout guides or a manual which can help users maximize their training and make the most out of their fitness regimen.

Another significant characteristic of this machine is its space-saving design. When not in use, it can be easily folded or stored away, making it an ideal choice for those short on space. The sleek design often complements home décor, allowing it to blend seamlessly into various environments.

Overall, the Sears 831 297241 stands out for its combination of functionality, comfort, and compactness. Whether you are new to fitness or looking to maintain your workout routine at home, this machine presents a comprehensive solution for achieving health and wellness goals. Its versatility, innovative features, and user-friendly design make it a commendable addition to any home gym setup.
Top Page Image Contents