XI. Lubrication

U.S. ELECTRICAL MOTORS INSTALLATION AND MAINTENANCE

Lubrication

E.Reassemble motor by reversing the disassembly procedure in Section IX “Disassembly”. Bearings should be installed per bearing manufacturer's recommended procedure. Pack bearings with grease per Section XI "Lubrication".

F.Torque bolts per values in Table 4.

G.Touch up any scratched or chipped paint to protect motor surfaces.

A.Relubrication of Units in Service

Units with grease lubricated bearings are pre-lubricated at the factory and normally do not require initial lubrication. Relubricating interval depends upon speed, type of bearing and service. Refer to Table 2 for suggested regreasing intervals. Note that operating environment and application may dictate more frequent lubrication.

Motor must be at rest and electrical controls should be locked open to prevent energizing while motor is being serviced (Refer to section on Safety, page i). If motor is being taken out of storage, refer to Section III "Storage". Part 4, for preparation instructions.

To relubricate bearings, remove the drain plug. Inspect grease drain and remove any blockage (caked grease or foreign particles) with a mechanical probe or scavenger (take care not to damage bearing). Under NO circumstances should a mechanical probe or scavenger be used while the motor is in operation. Add new grease at the grease inlet. New grease must be compatible with grease already in the motor (refer to Tables 2 and 3 for compatible greases and replenishment quantities).

CAUTION

Greases of different bases (lithium, polyurea, clay, etc.) may not be compatible when mixed. Mixing such greases can result in reduced lubricant life and premature bearing failure. Prevent such intermixing by disassembling motor, removing all old grease and repacking with new grease per Item B of this section. (Refer to Table 3 for recommended grease).

Run the motor for 15 to 30 minutes with the drain plug removed to allow purging of any excess grease (to eliminate the possibility of overgreasing). Shut off unit and replace the drain plug. Put motor back into operation.

CAUTION

Overgreasing can cause excessive bearing temperatures, premature lubricant breakdown and bearing failure. Care should be exercised against overgreasing.

B.Change of Lubricant:

Motor must be disassembled as outlined in Section IX "Disassembly".

Remove all old grease from bearings and housings (including all grease fill and drain holes). Inspect and replace damaged bearings. Fill bearing housings both inboard and outboard of bearing approximately 30 percent full of new grease. Grease fill fittings should be fully charged with new grease. Inject new grease into bearing between rolling elements to fill bearing. Remove any excess grease extending beyond the edges of the bearing races and retainers.

986269, LARGE AC ELECTRIC MOTORS specifications

Emerson Large AC Electric Motors, specifically model 986269, exemplify cutting-edge technology and exceptional design, catering to the diverse needs of industrial applications. These motors are engineered for reliability, efficiency, and performance, making them suitable for various sectors, including manufacturing, mining, and oil and gas.

One of the standout features of the Emerson 986269 motor is its robust construction. Built to withstand harsh operational environments, this motor has a durable housing that protects it from external contaminants such as dust, moisture, and chemicals, thereby prolonging its lifespan. The design promotes efficient heat dissipation, which minimizes overheating risks and enhances both performance and reliability.

Energy efficiency is a critical aspect of the Emerson 986269 AC electric motor. Utilizing advanced design methodologies, the motor offers high efficiency ratings, which translates into lower operational costs and reduced carbon footprints. It meets or exceeds the latest efficiency standards, making it an eco-friendly choice while ensuring optimal performance in various applications.

Another significant feature is its versatility. The Emerson 986269 motor is available in various sizes and configurations, making it suitable for different tasks and load requirements. Its adaptability allows seamless integration into existing systems, making it a valuable asset for businesses looking to upgrade their machinery without extensive modifications.

The motor employs state-of-the-art technologies such as premium-quality bearings and insulation systems, contributing to its quiet operation and minimal maintenance requirements. This means reduced downtime and increased productivity, both vital for maintaining competitive advantages in today's fast-paced industrial landscape.

Moreover, Emerson's commitment to safety is reflected in the design of the 986269 motor. It is equipped with advanced thermal protection features and complies with international safety standards, ensuring secure operation even in challenging conditions.

In conclusion, the Emerson Large AC Electric Motor 986269 sets the benchmark for performance, reliability, and efficiency in industrial applications. With its robust construction, energy-efficient design, and advanced technologies, it is an investment that promises long-term operational benefits and peace of mind for users. Whether for heavy-duty tasks or general industrial use, this motor remains a top choice for companies aiming to enhance their operational efficiency and productivity.