Cisco Systems 1700 appendix Variable Command

Page 6

Appendix B ROM Monitor

Disaster Recovery with TFTP Download

Note The commands described in this section are case sensitive and must be entered exactly as shown in the lists.

Required Variables

The following variables must be set with the commands shown before using the tftpdnld command:

Variable

Command

 

 

IP address of the router.

IP_ADDRESS= ip_address

 

 

Subnet mask of the router.

IP_SUBNET_MASK= ip_address

 

 

IP address of the default gateway of the

DEFAULT_GATEWAY= ip_address

router.

 

 

 

IP address of the TFTP server from

TFTP_SERVER= ip_address

which the software will be

 

downloaded.

 

 

 

The name of the file that will be

TFTP_FILE= filename

downloaded to the router.

 

 

 

Optional Variables

The following variables can be set with the commands shown before using the tftpdnld command:

Variable

Command

 

 

Whether or not the router performs a

TFTP_CHECKSUM=setting

checksum test on the downloaded

 

image:

 

1—Checksum test is performed.

 

0—No checksum test is performed.

 

 

 

 

Cisco 1700 Series Router Software Configuration Guide

B-6

78-5407-03

Image 6
Contents ROM Monitor Entering the ROM MonitorCommand Router Prompt Task ROM Monitor Commands Reset or Command DescriptionsCommand Description Help or ?Flash filename Disaster Recovery with Tftp DownloadTftp Download Command Variables Flash2 filenameVariable Command Using the Tftp Download Command TFTPTIMEOUT= timeTFTPVERBOSE= setting Configuration Register You will see output similar to the followingEnable Diagnostic mode? y/n n Command Description Console DownloadArgument Description Error Reporting DestinationfilenameDebug Commands Context-Display processor context. For exampleRommon 8 sysret System Return Info Appendix B ROM Monitor Debug Commands
Related manuals
Manual 12 pages 24.76 Kb Manual 88 pages 39.19 Kb Manual 85 pages 32.54 Kb