RS-232C
29
ENGLISH
07. Color (Command2:i)➜To adjust the screen color.
Transmission
Data Min : 0 ~ Max : 64
*Refer to ‘Real data mapping 1’.
Data Min : 0 ~ Max : 64
[k] [ i ] [ ] [Set ID] [ ] [Data] [Cr]
[ i ] [ ] [Set ID] [ ] [OK] [Data] [x]
Ack
08. Tint (Command2:j)➜To adjust the screen tint.
Transmission
Data Red : 0 ~ Green : 64
* Refer to ‘Real data mapping2’.
Data Red : 0 ~ Green : 64
[k] [ j ] [ ] [Set ID] [ ] [Data] [Cr]
[ j ] [ ] [Set ID] [ ] [OK] [Data] [x]
Ack
09. Sharpness (Command2:k)➜To adjust the screen sharpness.
Transmission
Data Min : 0 ~ Max : 64
* Refer to ‘Real data mapping 1’.
Data Min : 0 ~ Max : 64
[k] [k] [ ] [Set ID] [ ] [Data] [Cr]
[k] [ ] [Set ID] [ ] [OK] [Data] [x]
Ack
10. OSD Select(Command2:l)➜To select OSD On/Off.
Transmission
Data 0 : OSD Select Mode Off
1 : OSD Select Mode On
Data 0 : OSD Select Mode Off
1 : OSD Select Mode On
[k] [ l ] [ ] [Set ID] [ ] [Data] [Cr]
[ l ] [ ] [Set ID] [ ] [OK] [Data] [x]
Ack
11. Remote Control Lock/Key Lock(Command2:m)➜To lock the front panel controls on the
projector and remote control.
Transmission
Data 0 : Lock Off
1 : Lock On
Data 0 : Lock Off
1 : Lock On
[k] [m] [ ] [Set ID] [ ] [Data] [Cr]
[m] [ ] [Set ID] [ ] [OK] [Data] [x]
Ack
* If you're not using the remote control, use this mode.
When main power is On/Off, external control lock is released.
12. Color Temperature (ACC) (Command2:u)➜ Adjust the color temperature.
Transmission
Data 0 : Normal 1 : Cool 2:Warm
Data 0 : Normal 1 : Cool 2:Warm
[k] [u] [ ] [Set ID] [ ] [Data] [Cr]
[u] [ ] [Set ID] [ ] [OK] [Data] [x]
Ack
06. Brightness (Command2:h)➜To adjust screen brightness.
Transmission
Data Min : 0 ~ Max : 64
*Refer to ‘Real data mapping 1’.
Data Min : 0 ~ Max : 64
[k] [h] [ ] [Set ID] [ ] [Data] [Cr]
[h] [ ] [Set ID] [ ] [OK] [Data] [x]
Ack